Lucent Technologies P550R, P220 manual Port Commands, Mod-swport-spec specifies, Sample-interval

Port Commands

Table 1-13 shows new and changed Port Commands in Release 4.0.1:

Table 1-13: Port Commands

Old Command	New Command	New Definition/Argument
N/A	show ethernet counters	Display ethernet interface statistics.
	[{<mod-num><mod-	•	<mod-num>– specifies the chassis
	swport-spec>}]
			module number of the switch
			ports that are to have their
			ethernet statistics displayed. (Valid
			on 550 and 550R only)
		•	<mod-swport-spec> – specifies
			a particular switch port whose
			specific ethernet statistics are to be
			displayed.
		If no <mod-num> or <mod-swport-
		spec> is specified then ethernet inter-
		face statistics is displayed for all ports
		on all modules in the chassis.
		If <mod-num>is specified then all
		switch ports on that module have their
		ethernet interface statistics displayed.
		If <mod-swport-spec> is specified
		that particular port's ethernet interface
		statistics are displayed.
		Command Mode: User
N/A	show ethernet counters	Display interface ethernet history sam-
	<mod-swport-spec>	ples.
	history <sample-	•	<mod-num>– specifies the chassis
	interval>		module number of the switch
			ports that are to have their
			ethernet statistics displayed. (Valid
			on Cajun P550 and P550R only)
		•	<mod-swport-spec> – specifies
			a particular switch port whose
			specific ethernet statistics are to be
			displayed.
		• <sample-interval> The
			history sample interval.
		If no <mod-num> or <mod-swport-
		spec> is specified then ethernet inter-
		face statistics is displayed for all ports
		on all modules in the chassis.
		If <mod-num>is specified then all
		switch ports on that module have their
		ethernet interface statistics displayed.
		If <mod-swport-spec> is specified
		that particular port's ethernet interface
		statistics are displayed.
		Command Mode: User

Cajun P220, P550, P550R Switch Release Notes, Release 4.0.1 37