Liebert FS-8704-02 instruction manual BACnet Ethernet Description

Page 3

FS-8704-02_BacnetEthernet.doc Driver Manual

Page 3 of 20

1.BACnet Ethernet Description

The BACnet Ethernet driver allows the FieldServer to transfer data to and from devices over Ethernet using BACnet Ethernet protocol. The FieldServer can emulate either a Server or Client.

The information that follows describes how to expand upon the factory defaults provided in the configuration files included with the FieldServer.

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com

Image 3
Contents FS-8704-02 BACnet Ethernet Table of Contents BACnet Ethernet Description Provided by the Supplier of 3rd Party Equipment Hardware Hardware Connections Configuring the FieldServer as a BACnet Ethernet Client Data ArraysClient Side Connection Descriptions Client Side Node Descriptors Timing Parameters Driver Related Map Descriptor ParametersMap Descriptor Examples Server Side Connection Descriptors Configuring the FieldServer as a BACnet Ethernet ServerServer Side Node Descriptors Not found Driver Specific Map Descriptor ParametersObject Map Descriptor Example Appendix A.1. BACnet Object Names Appendix A. Advanced TopicsAppendix B.1. Debugging a BACnet connection Hints and tips Appendix B. TroubleshootingUnit Variation Appendix C. UnitsKVA GPM This page Intentionally Left Blank