Liebert FS-8704-02 instruction manual Driver Related Map Descriptor Parameters, Timing Parameters

FS-8704-02_BacnetEthernet.doc Driver Manual Page 8 of 20

4.4.Client Side Map Descriptors

4.4.1.FieldServer Related Map Descriptor Parameters

	Column Title		Function		Legal Values
	Map_Descriptor_Name		Name of this Map		Up to 32 alphanumeric
			Descriptor		characters
			Name of Data Array where		One of the Data Array names
	Data_Array_Name		data is to be stored in the		from “Data Array” section
			FieldServer		above
	Data_Array_Offset		Starting location in Data		0 to maximum specified in
			Array		“Data Array” section above
	Function		Function of Client Map		RDBC
			Descriptor
4.4.2.		Driver Related Map Descriptor Parameters
	Column Title		Function		Legal Values
	Node_Name		Name of Node to	One of the node names specified in
			fetch data from	“Client Node Descriptor” above
	Data_Type		Data type	Note 2
	Property		The BACnet	Present_Value
			property to be read
	Data_Array_Low_Scale*		Scaling zero in	-32767 to 32767, 0
			Data Array
	Data_Array_High_Scale*		Scaling max in Data	-32767 to 32767, 10000
			Array
	Node_Low_Scale*		Scaling zero in	-32767 to 32767, 0
			Connected Node
	Node_High_Scale*		Scaling max in	-32767 to 32767, 100
			Connected Node

4.4.3.Timing Parameters

Column Title	Function	Legal Values
Scan_Interval	Rate at which data is polled	0-32000s, 20s

Note 2

AI	- ANALOG INPUT	BV	- BINARY_VALUE
AO	- ANALOG_OUTPUT	MI	- MULTI_STATE_INPUT
AV	- ANALOG_VALUE	MO	- MULTI_STATE_OUTPUT
BI	- BINARY_INPUT	MV	- MULTI_STATE_VALUE
BO	- BINARY_OUTPUT

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com