Liebert 110V manual Mimic Indications, LED Indication

Chapter 1 - General Description User Manual

Network Power Switch

1.4 Mimic Indications

S1 Healthy S1 Priority S1 Feeding

Priority

Selection

Switch

Load on S1

Load on Super Switch Load on S2

Unsynchronised transfer

S2 Healthy S2 Priority S2 Feeding

Fig 1.4 – Mimic and LED Indications

LED INDICATION

Mimic indications: Ten LEDs are mounted on the mimic plate;

Glowing LED’s indicate the status of the Network Power Switch.

S1	Healthy:	Source –1 is a healthy source and is well above the 10% under voltage setting.
S2	Healthy:	Source –2 is a healthy source and is well above the 10% under voltage setting.
S1	Priority:	The priority selector switch is on S1 priority position.
S2	Priority:	The priority selector switch is on S2 priority position.
S1	Feeding:	The load is fed through source –1.
S2	Feeding:	The load is fed through source -2.
Overload:		Overload has occurred i.e. current level crossed 110% of full load.
Unsynchronized:		The sources are out of phase-synchronized window.
Load on S1:		Source –1 is feeding the load.
Load on S2:		Source –2 is feeding the load.

Page 1-4