User Manual | Chapter 1 - General Description |
Network Power Switch
1.3 Mechanical Design Description
FIXED UNIT
HOT SWAPPABLE UNIT
Fig 1.3 – Hot swappable and Fixed Unit
The Network Power Switch consists of two modules.
Fixed module consists of the input and output connections and manual bypass transfer control switch.
Second module is hot swappable
The bypass / transfer control switch is located on right side of the cabinet with a key lock to restrict access to qualified or designated operators. The plug in module likewise contains locked latches to prevent unauthorized removal of the module. The Network Power Switch is designed to allow replacement of the removable electronics switching module without having to
Entire power static switch module is hot swappable. Before removing this module the load is transferred without break to any one of the source directly. After replacing the static switch module, the load is again transferred back to Network Power Switch without break.