Lennox Hearth I200 manual Manual feeding, Damaged documents

Page 24

Manual feeding	Follow the guidelines for document size, type, weight, quantity, etc., in the
	Introduction section. Position the leading edge of the document face down
	and centered in the ADF, then start scanning.
Damaged documents	You can scan torn or fragile documents through the automatic document
	feeder if they are placed in a protective plastic sleeve.
	NOTE: The i280 Scanner has a feature (Special Document mode) that allows
	irregularly shaped documents or documents with holes to be scanned
	through the ADF. Refer to the following section, “Additional Features”
	for more information.
	1. Place the damaged document into a protective sleeve.

2. Position the sleeve face down, folded edge first, and centered in the ADF.

Gap release lever

3.Lift the gap release lever, if necessary (this provides more clearance to ease document feeding).

4.Start scanning.

20	A-61167 April 2005

Image 24

Contents User’s Guide Contents Using the Scanner TroubleshootingAppendix D Kodak i200 Series Dockable Flatbed Scanner features IntroductionPaper transport features Image quality featuresMaintenance Speed/Capacity ThroughputOptional accessories Preparing documents for scanning Recommended documents Safety information User precautionsSafety and regulatory agency approvals Environmental information Acoustic emission Power system EMC statements United StatesJapan TaiwanInstalling the Scanner Site specificationsSystem requirements Unpacking the scanner Registering your scanner Scanner componentsFront Rear SideInternal Making connections Power setup Page Page Tray extenders and side guides Page Using the Scanner Starting and stopping scanning Automatic feedingContinuous feeding Manual feeding Damaged documentsAdditional features Long Paper modeSpecial Document mode Perfect Page with IThresholdingToggle patch Maintenance Cleaning the scannerCleaning the separator module Front roller cover Page Cleaning the imaging guides Replacing parts Cleaning the paper pathCAT No Click Calibrate Troubleshooting Indicator lightsLamps Clearing document jams Adjusting the separator module tension System is not responding Color image quality Problem solving Problem Possible SolutionProblem Possible Solution Transporting the scanner Appendix a Specifications Power Source Scanner DimensionsScanner Weight DimensionsAppendix B Supplies and Accessories Contents of the imprinter kit Appendix C Kodak i200 Series ImprinterInstalling the imprinter Removing the circuit board coverAttaching the imprinter board and cable Thumbscrews Hook Imprinter connector Page Page Completing the imprinter installation Page Installing the ink blotter strips Installing an ink cartridge Setting the imprinter position Imprinter maintenance Replacing the ink blotter strips Replacing Ink cartridge carrier Print characters Printable Character SetImprinter specifications Contents of the dockable flatbed kit Flatbed specifications Installing the dockable flatbedAppendix D Kodak i200 Series Dockable Flatbed Remove the scanner front panel Using the flatbed Book scanningClick Calibrate Cleaning the flatbed After a power failure Removing the dockable flatbed Press firmly against the right side of the door to latch it Appendix E Installing Optional Memory Installing memory in the scannerScanner Model Document Size Basic Memory Total Memory Circuit board cover Remove the existing memory card from the main control board Eastman Kodak Company