Lennox Hearth I200 manual Imprinter maintenance

Page 55

Imprinter maintenance

The ink cartridges, ink blotter strips, and ink cartridge carrier used in the

 

imprinter will need replacing occasionally.

Imprinting problems

If you are having problems imprinting on scanned documents:

 

• Verify that the ink cartridge is not empty. The ink bladder inside the cartridge

 

is flat when it is empty.

 

• Make sure that the ink cartridge is properly installed in the imprinter.

 

• Make sure that the ink cartridge is located in the correct position

 

for imprinting.

 

• Make sure that the ink cartridge carrier is properly seated in its

 

positioning slot.

 

• Verify that all imprinter connectors are securely fastened and that the

 

imprinter cables are not folded or creased.

Expected life of imprinter

• Imprinter ink cartridge: approximately 750,000 non-bold characters

components

per cartridge

 

• Ink blotter strips: replace as necessary when soiled

 

• Ink cartridge carrier: approximately 500,000 pages

When the imprinter

When the imprinter is not being used, place the ink cartridge on its side so that

is not in use

ink does not drip down on the blotter strips.

Replacing an ink cartridge

Refer to “Installing an ink cartridge” in this chapter for information about

 

replacing an empty ink cartridge.

 

Purchase ink cartridges from an office supply retailer near you.

A-61167 April 2005

C-13

Image 55
Contents User’s Guide Contents Troubleshooting Using the ScannerAppendix D Kodak i200 Series Dockable Flatbed Introduction Scanner featuresSpeed/Capacity Throughput Paper transport featuresImage quality features MaintenanceOptional accessories Preparing documents for scanning Recommended documents User precautions Safety informationSafety and regulatory agency approvals Environmental information Acoustic emission Power system Taiwan EMC statementsUnited States JapanSite specifications Installing the ScannerSystem requirements Scanner components Unpacking the scanner Registering your scannerFront Side RearInternal Making connections Power setup Page Page Tray extenders and side guides Page Starting and stopping scanning Automatic feeding Using the ScannerContinuous feeding Damaged documents Manual feedingLong Paper mode Additional featuresSpecial Document mode IThresholding Perfect Page withToggle patch Cleaning the scanner MaintenanceCleaning the separator module Front roller cover Page Cleaning the imaging guides Cleaning the paper path Replacing partsCAT No Click Calibrate Indicator lights TroubleshootingLamps Clearing document jams Adjusting the separator module tension System is not responding Color image quality Problem Possible Solution Problem solvingProblem Possible Solution Transporting the scanner Appendix a Specifications Dimensions Power SourceScanner Dimensions Scanner WeightAppendix B Supplies and Accessories Appendix C Kodak i200 Series Imprinter Contents of the imprinter kitRemoving the circuit board cover Installing the imprinterAttaching the imprinter board and cable Thumbscrews Hook Imprinter connector Page Page Completing the imprinter installation Page Installing the ink blotter strips Installing an ink cartridge Setting the imprinter position Imprinter maintenance Replacing the ink blotter strips Replacing Ink cartridge carrier Printable Character Set Print charactersImprinter specifications Installing the dockable flatbed Contents of the dockable flatbed kit Flatbed specificationsAppendix D Kodak i200 Series Dockable Flatbed Remove the scanner front panel Book scanning Using the flatbedClick Calibrate Cleaning the flatbed After a power failure Removing the dockable flatbed Press firmly against the right side of the door to latch it Installing memory in the scanner Appendix E Installing Optional MemoryScanner Model Document Size Basic Memory Total Memory Circuit board cover Remove the existing memory card from the main control board Eastman Kodak Company

I200 specifications

The Lennox Hearth I200 is an exceptional wood-burning insert designed to provide warmth and aesthetic appeal to various living spaces. Renowned for its efficiency and innovative features, the I200 transforms traditional fireplaces into powerful heating sources, ensuring a cozy atmosphere during the colder months.

One of the standout features of the I200 is its high efficiency rating. The insert boasts an impressive EPA-certified efficiency of over 78%, which means it maximizes heat output while minimizing emissions. This not only helps reduce environmental impact but also allows homeowners to save on heating costs.

The I200 is constructed with durable materials, including premium cast iron and high-quality steel, ensuring longevity and resilience against the elements. Its sleek, contemporary design is available in multiple finishes, allowing it to seamlessly integrate into various home décors, from rustic to modern.

In terms of heating capacity, the I200 can effectively warm spaces of up to 2,000 square feet, making it an ideal choice for larger rooms or open floor plans. The insert features a significant firebox capacity, allowing for longer burn times and reducing the need for frequent refueling.

One of the advanced technologies incorporated into the Lennox I200 is its secondary combustion system. This innovative feature promotes complete combustion by recycling smoke and gases back into the fire, resulting in an efficient burn that produces minimal smoke. This not only enhances heat output but also contributes to a cleaner environment, producing fewer particulates and ensuring compliance with stringent emissions regulations.

User convenience is another key aspect of the I200. The insert includes an easy-to-use air control system that allows users to regulate airflow with precision, fine-tuning the burn rate and heat output just the way they want it. Additionally, the large glass door provides a clear view of the fire, creating a captivating focal point in any room.

Safety features are also prioritized in the I200 design. A robust safety screen prevents sparks from escaping, while a heat shield ensures the insert remains safe to the touch, providing peace of mind for families with children and pets.

Overall, the Lennox Hearth I200 wood-burning insert combines efficiency, design, and advanced technology, making it an ideal heating solution for anyone looking to enhance their home with the warmth and charm of a traditional wood fire. Whether for primary heat or decorative use, the I200 delivers unmatched performance and reliability.