Lennox Hearth I200 Power Source, Scanner Dimensions, Scanner Weight, Dockable Flatbed, Humidity

Page 41

Power Source

Phihong PSM 1564-240

 

IMPORTANT: Do not substitute another power supply model or another

 

 

manufacturer’s power supply.

 

 

Scanner Dimensions

Height:

 

35.4 cm (14.0 in.) without trays

 

36.4 cm (14.4 in.) with trays folded up

 

Width:

 

62.5 cm (24.6 in.)

 

Depth:

 

28.7 cm (11.3 in.) without trays

 

30.0 cm (11.8 in.) with trays folded up

 

68.1 cm (26.8 in.) with trays extended

 

 

Scanner Weight

i250 Scanner: 12.5 kg (27.5 lb.)

 

i260 Scanner: 13.9 kg (30.5 lb.)

 

i280 Scanner: 13.9 kg (30.5 lb.)

 

 

Dockable Flatbed

Height: 16.3 cm (6.4 in.)

Dimensions

Width: 48.6 cm (19.1 in.)

 

 

Length: 64.3 cm (25.3 in.)

 

 

Dockable Flatbed Weight

7.3 kg (16.0 lb.)

 

 

Host Connection

IEEE-1394 (FireWire) interface, 6-pin connector

 

 

Operating Temperature

15 to 35°C (59-95°F)

 

 

Humidity

15 to 76% (dry bulb)

 

 

Environmental Feature

Energy Star compliant

 

 

Power Consumption

i250/i260 Running: <156W

 

i250/i260 Energy Star: <12W

 

 

Heat Load

600 BTU

 

 

Altitude

Up to 2440 m (8000 ft)

 

 

Acoustic Noise

Data was measured in accordance with DIN 45 635, ANSI S12.10-1985, and

 

ISO 7779 in a semi-anechoic chamber. Data reported was measured at Sound

 

Pressure level.

 

Operating: 39.7 dB

 

Standby: 57 dB

 

 

 

 

 

Specification values apply to all of the i200 Series Scanners except where

 

 

noted. Specifications are subject to change without notice.

A-2

A-61167 April 2005

Image 41
Contents User’s Guide Contents Troubleshooting Using the ScannerAppendix D Kodak i200 Series Dockable Flatbed Introduction Scanner featuresImage quality features Paper transport featuresMaintenance Speed/Capacity ThroughputOptional accessories Preparing documents for scanning Recommended documents User precautions Safety informationSafety and regulatory agency approvals Environmental information Acoustic emission Power system United States EMC statementsJapan TaiwanSite specifications Installing the ScannerSystem requirements Front Unpacking the scanner Registering your scannerScanner components Internal RearSide Making connections Power setup Page Page Tray extenders and side guides Page Continuous feeding Using the ScannerStarting and stopping scanning Automatic feeding Damaged documents Manual feedingSpecial Document mode Additional featuresLong Paper mode Toggle patch Perfect Page withIThresholding Cleaning the scanner MaintenanceCleaning the separator module Front roller cover Page Cleaning the imaging guides CAT No Replacing partsCleaning the paper path Click Calibrate Lamps Clearing document jams TroubleshootingIndicator lights Adjusting the separator module tension System is not responding Color image quality Problem Possible Solution Problem solvingProblem Possible Solution Transporting the scanner Appendix a Specifications Scanner Dimensions Power SourceScanner Weight DimensionsAppendix B Supplies and Accessories Appendix C Kodak i200 Series Imprinter Contents of the imprinter kitRemoving the circuit board cover Installing the imprinterAttaching the imprinter board and cable Thumbscrews Hook Imprinter connector Page Page Completing the imprinter installation Page Installing the ink blotter strips Installing an ink cartridge Setting the imprinter position Imprinter maintenance Replacing the ink blotter strips Replacing Ink cartridge carrier Printable Character Set Print charactersImprinter specifications Appendix D Kodak i200 Series Dockable Flatbed Contents of the dockable flatbed kit Flatbed specificationsInstalling the dockable flatbed Remove the scanner front panel Book scanning Using the flatbedClick Calibrate Cleaning the flatbed After a power failure Removing the dockable flatbed Press firmly against the right side of the door to latch it Scanner Model Document Size Basic Memory Total Memory Appendix E Installing Optional MemoryInstalling memory in the scanner Circuit board cover Remove the existing memory card from the main control board Eastman Kodak Company

I200 specifications

The Lennox Hearth I200 is an exceptional wood-burning insert designed to provide warmth and aesthetic appeal to various living spaces. Renowned for its efficiency and innovative features, the I200 transforms traditional fireplaces into powerful heating sources, ensuring a cozy atmosphere during the colder months.

One of the standout features of the I200 is its high efficiency rating. The insert boasts an impressive EPA-certified efficiency of over 78%, which means it maximizes heat output while minimizing emissions. This not only helps reduce environmental impact but also allows homeowners to save on heating costs.

The I200 is constructed with durable materials, including premium cast iron and high-quality steel, ensuring longevity and resilience against the elements. Its sleek, contemporary design is available in multiple finishes, allowing it to seamlessly integrate into various home décors, from rustic to modern.

In terms of heating capacity, the I200 can effectively warm spaces of up to 2,000 square feet, making it an ideal choice for larger rooms or open floor plans. The insert features a significant firebox capacity, allowing for longer burn times and reducing the need for frequent refueling.

One of the advanced technologies incorporated into the Lennox I200 is its secondary combustion system. This innovative feature promotes complete combustion by recycling smoke and gases back into the fire, resulting in an efficient burn that produces minimal smoke. This not only enhances heat output but also contributes to a cleaner environment, producing fewer particulates and ensuring compliance with stringent emissions regulations.

User convenience is another key aspect of the I200. The insert includes an easy-to-use air control system that allows users to regulate airflow with precision, fine-tuning the burn rate and heat output just the way they want it. Additionally, the large glass door provides a clear view of the fire, creating a captivating focal point in any room.

Safety features are also prioritized in the I200 design. A robust safety screen prevents sparks from escaping, while a heat shield ensures the insert remains safe to the touch, providing peace of mind for families with children and pets.

Overall, the Lennox Hearth I200 wood-burning insert combines efficiency, design, and advanced technology, making it an ideal heating solution for anyone looking to enhance their home with the warmth and charm of a traditional wood fire. Whether for primary heat or decorative use, the I200 delivers unmatched performance and reliability.