Lennox Hearth I200 manual System is not responding Color image quality

Page 36

System is not responding

Color image quality

If the scanner and/or host computer are not responding, perform the following steps.

1.Power down the computer.

2.Power down the scanner.

3.Disconnect the IEEE-1394 (FireWire) cable from the IEEE-1394 port on the back of the scanner.

4.Power up the computer.

5.Power up the scanner.

After you power up the scanner, the red and green indicator lights will illuminate. After approximately one minute, both lights go out. When the green indicator light comes back on, the scanner is ready to begin scanning. However, the host computer may require a few more seconds to detect the scanner.

6.Wait until the scanner light is green and no longer in the power-up mode.

7.Attach the IEEE-1394 (FireWire) cable to the IEEE-1394 port on the back of the scanner.

8.Wait a few moments for the host computer’s operating system to recognize the scanner.

The scanner is now ready to use.

Color image quality is highly subjective. Here are some things to consider when scanning in color:

•The difference in the color outputs of scanners, printers, and monitors can affect the perception of the scanned document.

•Computer displays and printer output can vary from model to model, and from manufacturer to manufacturer. An image may be acceptable on one display and unacceptable on another.

•Area lighting (fluorescent, natural, incandescent) can affect color perception.

•The appearance of a colored area within an image can be perceived differently, based on what surrounds it.

•The characteristics and condition of a document can have an impact on color consistency.

•Color requirements may differ between environments (e.g., in a business document environment, images are generally viewed on a monitor, whereas in a “print on demand” environment, scanned images are printed).

To ensure that your scanner is delivering the best image:

•Clean the scanner. Contamination within the scanner degrades image quality. (Refer to the Maintenance section for cleaning information.)

•Calibrate the scanner occasionally and make sure that the calibration target is clean and unwrinkled.

32

A-61167 April 2005

Page 35 Page 37
Image 36
Page 35 Page 37
Contents User’s Guide Contents Using the Scanner TroubleshootingAppendix D Kodak i200 Series Dockable Flatbed Scanner features IntroductionPaper transport features Image quality featuresMaintenance Speed/Capacity ThroughputOptional accessories Preparing documents for scanning Recommended documents Safety information User precautionsSafety and regulatory agency approvals Environmental information Acoustic emission Power system EMC statements United StatesJapan TaiwanInstalling the Scanner Site specificationsSystem requirements Unpacking the scanner Registering your scanner Scanner componentsFront Rear SideInternal Making connections Power setup Page Page Tray extenders and side guides Page Using the Scanner Starting and stopping scanning Automatic feedingContinuous feeding Manual feeding Damaged documentsAdditional features Long Paper modeSpecial Document mode Perfect Page with IThresholdingToggle patch Maintenance Cleaning the scannerCleaning the separator module Front roller cover Page Cleaning the imaging guides Replacing parts Cleaning the paper pathCAT No Click Calibrate Troubleshooting Indicator lightsLamps Clearing document jams Adjusting the separator module tension System is not responding Color image quality Problem solving Problem Possible SolutionProblem Possible Solution Transporting the scanner Appendix a Specifications Power Source Scanner DimensionsScanner Weight DimensionsAppendix B Supplies and Accessories Contents of the imprinter kit Appendix C Kodak i200 Series ImprinterInstalling the imprinter Removing the circuit board coverAttaching the imprinter board and cable Thumbscrews Hook Imprinter connector Page Page Completing the imprinter installation Page Installing the ink blotter strips Installing an ink cartridge Setting the imprinter position Imprinter maintenance Replacing the ink blotter strips Replacing Ink cartridge carrier Print characters Printable Character SetImprinter specifications Contents of the dockable flatbed kit Flatbed specifications Installing the dockable flatbedAppendix D Kodak i200 Series Dockable Flatbed Remove the scanner front panel Using the flatbed Book scanningClick Calibrate Cleaning the flatbed After a power failure Removing the dockable flatbed Press firmly against the right side of the door to latch it Appendix E Installing Optional Memory Installing memory in the scannerScanner Model Document Size Basic Memory Total Memory Circuit board cover Remove the existing memory card from the main control board Eastman Kodak Company

I200 specifications

The Lennox Hearth I200 is an exceptional wood-burning insert designed to provide warmth and aesthetic appeal to various living spaces. Renowned for its efficiency and innovative features, the I200 transforms traditional fireplaces into powerful heating sources, ensuring a cozy atmosphere during the colder months.

One of the standout features of the I200 is its high efficiency rating. The insert boasts an impressive EPA-certified efficiency of over 78%, which means it maximizes heat output while minimizing emissions. This not only helps reduce environmental impact but also allows homeowners to save on heating costs.

The I200 is constructed with durable materials, including premium cast iron and high-quality steel, ensuring longevity and resilience against the elements. Its sleek, contemporary design is available in multiple finishes, allowing it to seamlessly integrate into various home décors, from rustic to modern.

In terms of heating capacity, the I200 can effectively warm spaces of up to 2,000 square feet, making it an ideal choice for larger rooms or open floor plans. The insert features a significant firebox capacity, allowing for longer burn times and reducing the need for frequent refueling.

One of the advanced technologies incorporated into the Lennox I200 is its secondary combustion system. This innovative feature promotes complete combustion by recycling smoke and gases back into the fire, resulting in an efficient burn that produces minimal smoke. This not only enhances heat output but also contributes to a cleaner environment, producing fewer particulates and ensuring compliance with stringent emissions regulations.

User convenience is another key aspect of the I200. The insert includes an easy-to-use air control system that allows users to regulate airflow with precision, fine-tuning the burn rate and heat output just the way they want it. Additionally, the large glass door provides a clear view of the fire, creating a captivating focal point in any room.

Safety features are also prioritized in the I200 design. A robust safety screen prevents sparks from escaping, while a heat shield ensures the insert remains safe to the touch, providing peace of mind for families with children and pets.

Overall, the Lennox Hearth I200 wood-burning insert combines efficiency, design, and advanced technology, making it an ideal heating solution for anyone looking to enhance their home with the warmth and charm of a traditional wood fire. Whether for primary heat or decorative use, the I200 delivers unmatched performance and reliability.
Top Page Image Contents