Lennox Hearth I200 manual Installing the ink blotter strips

Page 52

Installing the ink blotter strips

Two ink blotter strips in the scanner transport area collect ink overflow. NOTE: Improperly aligned blotter strips may cause paper jams.

1.Lift up the scanner door release to unlatch the scanner door.

2.Pull up to open the scanner door.

3.Locate the two channels in the rear of the transport area. These channels are where the blotter strips will be installed.

Channels

4.Remove the backing from a new blotter strip.

5.Align the blotter strip in one of the channels.

NOTE: Improperly aligned blotter strips may cause paper jams.

6.Press the adhesive side of the blotter strip down firmly into the channel.

7.Repeat Steps 4-6 for the other strip.

8. Lower the scanner door and press it firmly until it snaps into place.

C-10	A-61167 April 2005

Image 52

Contents User’s Guide Contents Using the Scanner TroubleshootingAppendix D Kodak i200 Series Dockable Flatbed Scanner features IntroductionPaper transport features Image quality featuresMaintenance Speed/Capacity ThroughputOptional accessories Preparing documents for scanning Recommended documents Safety information User precautionsSafety and regulatory agency approvals Environmental information Acoustic emission Power system EMC statements United StatesJapan TaiwanInstalling the Scanner Site specificationsSystem requirements Scanner components Unpacking the scanner Registering your scannerFront Side RearInternal Making connections Power setup Page Page Tray extenders and side guides Page Starting and stopping scanning Automatic feeding Using the ScannerContinuous feeding Manual feeding Damaged documentsLong Paper mode Additional featuresSpecial Document mode IThresholding Perfect Page withToggle patch Maintenance Cleaning the scannerCleaning the separator module Front roller cover Page Cleaning the imaging guides Cleaning the paper path Replacing partsCAT No Click Calibrate Indicator lights TroubleshootingLamps Clearing document jams Adjusting the separator module tension System is not responding Color image quality Problem solving Problem Possible SolutionProblem Possible Solution Transporting the scanner Appendix a Specifications Power Source Scanner DimensionsScanner Weight DimensionsAppendix B Supplies and Accessories Contents of the imprinter kit Appendix C Kodak i200 Series ImprinterInstalling the imprinter Removing the circuit board coverAttaching the imprinter board and cable Thumbscrews Hook Imprinter connector Page Page Completing the imprinter installation Page Installing the ink blotter strips Installing an ink cartridge Setting the imprinter position Imprinter maintenance Replacing the ink blotter strips Replacing Ink cartridge carrier Print characters Printable Character SetImprinter specifications Installing the dockable flatbed Contents of the dockable flatbed kit Flatbed specificationsAppendix D Kodak i200 Series Dockable Flatbed Remove the scanner front panel Using the flatbed Book scanningClick Calibrate Cleaning the flatbed After a power failure Removing the dockable flatbed Press firmly against the right side of the door to latch it Installing memory in the scanner Appendix E Installing Optional MemoryScanner Model Document Size Basic Memory Total Memory Circuit board cover Remove the existing memory card from the main control board Eastman Kodak Company