LaCie 526 user manual Video Detect, OFF Timer, Uniformity

LaCie 500 Series LCD Monitor

User Manual

OSD Control Menu Functions

page 22

Symbol	Menu title	Explanation
	VIDEO DETECT	Selects the method of video detection when more than one computer is connected.
		FIRST
		The video input must be switched to FIRST mode. When the primary video input signal is
		lost, the monitor searches for a secondary signal from the alternate video input port. If
		a video signal is present, the monitor will automatically switch to the active source. The
		monitor will not look for other video signals while the primary video source is present.
		LAST
		The video input must be switched to LAST mode. No matter if a video source is playing in
		the primary video port, the monitor will switch signals if video is present in the alternate, or
		secondary port.
		NONE
		The monitor will not search the alternate video input port unless the port has been turned
		on.
	OFF TIMER	The monitor will automatically power down after a preset period of use. Before powering
		off, a message will appear on the screen asking if the user wants to delay the shut off time
		by 60 minutes. Press any OSD button to accept the delay. To adjust the preset period of
		time, select ON, then press SELECT and LEFT or RIGHT.
	UNIFORMITY	Electronically compensates for the slight variations in the white uniformity level, as well as
		for deviations in color that may occur throughout the display area of the screen. These
		variations are characteristic of LCD panel technology. This function improves the color and
		evens out the luminance uniformity of the display. Using the UNIFORMITY feature reduces
		the overall peak luminance of the display. If greater luminance is desired over the uniform
		performance of the display, then UNIFORMITY should be turned off.
	POWER MANAGER	The Power Manager has three settings:
		OFF
		Monitor does not go into power save mode when the input signal is lost.
		STANDARD
		Monitor enters power save mode automatically when the input signal is lost.

OPTION

Monitor enters power save mode automatically when the amount of surrounding light goes below the level that is determined by the user. The level can be adjusted in Tag7 of the

4.9.Advanced Menu Functions. When in POWER MANAGER, the LED on the front of the monitor blinks amber. While in POWER MANAGER, push any of the front buttons, except for POWER and SELECT, to return to normal. When the amount of surrounding light returns to standard levels, the monitor will automatically return to normal mode.