LaCie 526 user manual Zoom POS, Gamma, Selection

LaCie 500 Series LCD Monitor

User Manual

OSD Control Menu Functions

page 30

Tag	Menu title	Explanation
Tag4	V. RESOLUTION	Adjusts the vertical size by increasing or decreasing the setting. Press the RIGHT button to
		expand the height of the image on the screen. Press the LEFT button to narrow the height of
		the image on the screen.
	EXPANSION	Sets the zoom method.
		FULL: The image is expanded to 1920 x 1200 regardless of the resolution.
		ASPECT: The image is expanded without changing the aspect ratio.
		OFF: The image is not expanded.
		CUSTOM: When CUSTOM is selected as the Expansion mode, you can adjust the H.
		ZOOM, V. ZOOM, and ZOOM POS.
	H.ZOOM	The image is expanded from 1 to 3 times in the horizontal (H. EXPANSION) direction by
	(Available in Custom	0.01 increments.
	Expansion mode only)
	V.ZOOM	The image is expanded from 1 to 3 times in the vertical (V. EXPANSION) direction by 0.01
	(Available in Custom	increments.
	Expansion mode only)
	ZOOM POS.	Sets the point from which the screen will be expanded when either H.ZOOM or V.ZOOM
	(Available in Custom	are adjusted in Expansion mode. Options are CENTER and LEFT TOP.
	Expansion mode only)	CENTER: H.ZOOM expands the image outward, from the center to the sides of the screen.
		V.ZOOM expands the image from the center to the top and bottom of the screen.
		LEFT TOP: Indicates the set point for image expansion (TOP in V. ZOOM, LEFT in
		H.ZOOM). The image will not expand past the TOP or the LEFT of the screen if the resolu-
		tion does not fill the screen. The image can be expanded past the right and bottom edges of
		the screen.
Tag5	GAMMA	Allows you to manually select the brightness level of the grayscale. There are five selections: NO
	SELECTION	CORRECTION, 2.2, OPTION, PROGRAMMABLE, and CUSTOM.
		NO CORRECTION: No Correction possible.
		2.2: The value is fixed at 2.2.
		OPTION: Two choices offers two choices.
		1: This setting is recommended for Video sources. Gray areas look much brighter than the
		NO CORRECTION setting.
		2: The value near DICOM gamma is set up in a factory and the luminosity difference be-
		tween gradations adjusts toward a legible state.
		PROGRAMMABLE: The brightness of the grayscale is adjusted to your preference using
		LaCie blue eye pro software.
		CUSTOM offers two options:
		Custom Value: The gamma value is selected from a rate of 0.5 to 4.0 by 0.1 steps.
		When the COLOR CONTROL is sRGB, the value is fixed at 2.2 and NOT ADJUSTABLE.
		Offset: The OFFSET digitally adjusts the black level after the signal is converted from analog
		to digital.

continued on next page>>