LaCie 500 Series LCD Monitor
User Manual
OSD Control Menu Functions
page 31
Tag | Menu title | Explanation |
Tag6 | COLOR | Color Control Systems: Seven preset color settings. |
| CONTROL | For preset settings 1, 2, 3 and 5, the following levels can be adjusted: |
|
| TEMPERATURE: Adjust the white temperature. A lower color temperature will make the |
|
| screen reddish and a higher color temperature will make the screen bluish. |
|
| WHITE (White Balance): Use only if TEMPERATURE needs further adjustment. Individual |
|
| R/G/B levels of the white point can be adjusted. To adjust the R/G/B levels, CUSTOM must |
|
| be showing as the TEMPERATURE selection. |
|
| HUE: Adjusts the hue of each color*. The change in color will appear on screen and the |
|
| menu color bars will show the amount of adjustment. |
|
| SATURATION: Adjusts the color depth of each color*. Press the RIGHT button to increase |
|
| the color vividness. |
|
| OFFSET: Adjusts the color brightness of each color*. Press the RIGHT button and the color |
|
| brightness increases. |
|
| *RED, YELLOW, GREEN, CYAN, BLUE and MAGENTA. |
|
| NATIVE, sRGB: Original color presented by the LCD panel that is not adjustable. |
|
| PROGRAMMABLE: The color tone set up with the downloaded application software. |
|
| NOTE: When sRGB, Adobe® RGB and PROGRAMMABLE are set by PICTURE MODE, you |
|
| cannot select COLOR CONTROL. |
Tag7 | SHARPNESS | This function digitally maintains crisp images with all timings. It adjusts continuously to set |
|
| images as distinct or as soft as you prefer. It may be set independently by different timings. |
| DVI SELECTION | This function selects the DVI input mode. When the DVI selection has been changed, you |
|
| must restart your computer. Press LEFT or RIGHT to select. |
|
| AUTO: By using the |
|
| By using the |
|
| DIGITAL: DVI digital input is available. |
|
| ANALOG: DVI analog input is available. |
| EDID EXTENSION | Selects the type of input to be used with EDID EXTENSION. |
| (Digital Input Only) | NORMAL: When a PC or other computer equipment is connected, select NORMAL. |
|
| ENHANCED: When a DVD player or other type of high definition device is connected, select |
|
| ENHANCED. |
|
| NOTE: Interlaced signals (480i, 576i, 1080i) are not supported. |
|
| When EDID EXTENSION has been changed, the connected equipment has to be restarted. |
| INPUT DEVICE | Selects the HDCP Enabled input device, such as a media player (DVD) or a PC. A media |
| (Digital Input Only) | player is the default setting and can be used when a PC is the playback device. If you do not |
|
| see a signal, switch to PC for better results. |
continued on next page>>