Ntaa SW, Size, Resolution | LaCie 526 guide

User Manual

OSD Control Menu Functions

page 29

Tag	Menu title	Explanation
Tag3	A-NTAA SW	The Advanced No Touch Auto Adjust function is able to recognize new signals even when
	(Analog Input Only)	the resolution and the refresh rate have not been changed. If several PCs are connected to
		the monitor, each transmitting very similar (or even the same) resolution and refresh rate
		signals, the monitor recognizes the new signal and automatically optimizes the picture.
		OFF: A-NTAA is disabled.
		ON: If a change in signal is detected, A-NTAA will adjust the monitor to the optimal settings.
		If no change in the signal is detected then A-NTAA does not activate. The screen will be
		blank while the monitor optimizes the signal.

Tag4	H. POSITION	Controls Horizontal Image Position within the display area of the LCD. Press LEFT or RIGHT
		to adjust.
	V. POSITION	Controls Vertical Image Position within the display area of the LCD. Press LEFT or RIGHT to
		adjust.
	H. SIZE	Adjusts the horizontal size of the screen. If AUTO ADJUST does not give you a satisfac-
	(Analog Input Only)	tory picture setting, a further tuning can be performed using the H.SIZE (V.SIZE). A Moiré
		test pattern may assist in optimizing your settings. Please note that this function may alter
		the width of the picture. Use LEFT or RIGHT to center the image on the screen. The image
		should be homogeneous.
	FINE	Adjusts the horizontal size of the screen. If AUTO ADJUST does not give you a satisfac-
	(Analog Input Only)	tory picture setting, a further tuning can be performed using the H.SIZE (V.SIZE). A Moiré
		test pattern may assist in optimizing your settings. Please note that this function may alter
		the width of the picture. Use LEFT or RIGHT to center the image on the screen. The image
		should be homogeneous.
	AUTO FINE	This function automatically and periodically adjusts the FINE setting for changes in the con-
	(Analog Input Only)	dition of the signal. AUTO FINE adjusts approximately every 33 minutes or when a change
		in signal timing is detected.
	H. RESOLUTION	Adjusts the horizontal size by increasing or decreasing the setting. Press the RIGHT button to
		expand the width of the image on the screen. Press the LEFT button to narrow the width of
		the image on the screen.

continued on next page>>

A-NTAA SW