LaCie 500 Series LCD Monitor
User Manual
OSD Control Menu Functions
page 35
Tag | Menu title | Explanation |
Tag9 | PORTRAIT WARNING | When the monitor is used in the Portrait position, the brightness value will be reduced to 250 |
|
| cd/m2 maximum. If the Portrait Warning is ON, a message will appear on the screen for ten |
|
| seconds. |
| DDC/CI | DDC/CI ENABLE/DISABLE: Turns on or off the two way communication and control of the |
|
| monitor. |
| INPUT SETTING | Video Band Width (Analog Input Only): Used when there is too much noise on the screen. |
|
| Press LEFT or RIGHT to select. The higher the number, the greater the correction. |
Sync Threshold (Analog input only): Adjusts the slice level of a synchronization signal. Press SELECT to move the adjustment menu. Adjusts the sensitivity of the separate or composite input signals. Try this option if the FINE adjustment does not successfully eliminate the noise.
|
| SOG Threshold (Analog input only): Adjusts the sensitivity of the Sync On Green input sig- |
|
| nals. Adjusts the slice level when separating synchronization from the Sync On Green signal |
|
| input. Press LEFT or RIGHT to select. |
|
| CLAMP POSITION: Operating your monitor at a |
|
| to appear darker than normal or have color distortion. The CLAMP POSITION control will |
|
| adjust images to their normal state. |
TagA | TILING | A single screen displaying up to 25 monitors, TILING allows for viewing multiple signals. It |
|
| will be able to divide up to five each on the Horizontal and the Vertical. |
|
| The PC’s output signal must be sent to a distribution amplifier to each monitor. |
|
| H MONITORS: Select the number of horizontal displays. |
|
| V MONITORS: Select the number of vertical displays. |
|
| MONITOR NO.: Select a position to expand the screen. |
|
| FRAME CUT: Works in tandem with TILING to compensate for the width of the tile bezels in |
|
| order to accurately display the image. |
|
| FRAME CUT with four monitors (black area shows monitor frames): |
Monitor 1 | Monitor 2 | Monitor 1 | Monitor 2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Monitor 3 |
|
|
| Monitor 4 |
|
|
|
| Monitor 3 |
|
|
|
| Monitor 4 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| FRAME CUT OFF | FRAME CUT ON |
TagB | INFORMATION | INFORMATION listed includes the current display resolution technical data, the horizontal | |
|
| and vertical frequencies, and the model and serial numbers. | |