LaCie 500 Series LCD Monitor
User Manual
OSD Control Menu Functions
page 36
4.10. Using the Picture Mode Function
Choose the Picture mode that is best suited to display the selected content. You may adjust the BRIGHTNESS, AUTO LUMINANCE and UNIFORMITY while in this mode. There are four Picture modes: STANDARD, sRGB, Adobe RGB, and PRO-
GRAMMABLE.
•• To access the Picture mode, press the RESET button while the OSD menu is not active.
•• To select a mode, press the LEFT and RIGHT button.
•• To exit the Picture mode, press the EXIT button.
•• Scroll the menu using the UP and DOWN buttons and make all adjustments with the LEFT and RIGHT buttons.
TECHNICAL NOTE: When PROGRAMMABLE is selected, you cannot adjust the BRIGHTNESS or use AUTO LUMINANCE.
TECHNICAL NOTE: To make adjustments using Adobe RGB mode, choose sRGB mode then press SELECT.
Picture Mode | Purpose | Color Control | Gamma Selection (Advanced Menu) |
STANDARD | Save the color set- | Settings made via the OSD | Settings made via the OSD GAMMA Selection. |
| tings according to | COLOR CONTROL. |
|
| your preference. |
|
|
sRGB | Save sRGB set- | Fixed at 6500K for sRGB | Fixed to GAMMA for sRGB (OSD GAMMA adjustment |
| tings. | (OSD COLOR CONTROL | not available). |
|
| adjustment not available). |
|
Adobe RGB | Save Adobe RGB | Fixed at 6500K for | Fixed at 2.2 for Adobe RGB (OSD GAMMA adjustment |
| settings. | Adobe RGB (OSD COLOR | not available). |
|
| CONTROL adjustment not |
|
|
| available). |
|
PROGRAMMABLE | Save the LaCie | Fixed at PROGRAMMABLE | Fixed at PROGRAMMABLE (OSD GAMMA adjustment |
| blue eye pro set- | (OSD COLOR CONTROL | not available). |
| tings. (BRIGHT- | adjustment not available). |
|
| NESS is disabled.) |
|
|
|
|
|
|