USE OF CONTROLS
1LCD DISPLAY
The LCD Display Panel will illuminate when the CD changer is operating. Different symbols will appear depending on the function and operation in use. Each display is explained in the applicable function explanation below.
2PLAY / PAUSE (
/ 
)
Pressing this button turns on the CD changer, illuminates the LCD panel and begins play of disc #1 if a new CD magazine has been loaded into the changer. If a magazine was already in the changer, play will resume from the track on the disc previously in play. Play of the disc is shown by the indication 
and the rotating disc symbol on the LCD panel. Pressing the button again will temporarily stop play of the disc. The pause indication 
will appear on the LCD panel and the disc symbol will stop rotating and flash instead. Press the button again to resume play of the disc.
NOTE: If left in the PAUSE mode for 5 minutes, the unit will automatically shut off.
3POWER OFF SWITCH (OFF)
Press this switch to turn the CD changer off and return to normal FM reception.
4DISC SELECT ( - +)
Press the disc select button to select the desired disc for play as shown on the LCD panel. The unit will automatically load the selected disc and begin play. To advance to a higher number disc, press the + side of the button. To return to a lower number, press the - side.
5TRACK SELECT ( 
)
The Track Select function is used to quickly access the begin-
ning of a particular track. Press Forward Track Select ( 
)
or Backward Track Select ( 
) to locate the desired track as shown by the track number indication on the LCD panel.
6TRACK SEARCH (
)
High-speed audible search to any section of the disc can be
made by the search functions. Press and hold the 
button to advance quickly in the forward direction or press and hold the 
button to advance rapidly in the backward direction. Dur- ing search operation, the rotation disc symbol will turn faster and
the appropriate symbol | or | will flash on the LCD panel. |
When the forward search |
| button is held down and end of |
the last track is reached, or the backward search 
is held down and the unit reaches the beginning of the first track on the disc, the unit will enter the Pause mode until the button is released.
7TRACK / DISC SHUFFLE (SHFL)
When the Shuffle button is pressed, the indication SHFL will appear on the LCD panel and the tracks on the disc will be played in a random, shuffled order. The Track Skip 5 function will also select tracks in the shuffled order instead of the normal progression. The Track Shuffle mode can be cancelled by
14
pressing the Shuffle again, or by activating the Scan 9 or Repeat 8 functions.
When the Shuffle button is pressed and held longer than 2 seconds, the SHFL and DISC indications will appear on the LCD panel and the discs in the magazine will be played in a random shuffled order, as well as the tracks on each disc. When all the tracks on the selected disc have been played, the next disc will be selected in shuffled order and its tracks will be played in shuffled order. The Disc Shuffle mode can be cancelled by pressing the Shuffle button again, or by activating the Scan 9 or Repeat 8 functions.
8TRACK / DISC REPEAT (RPT)
When the Repeat button is pressed, the indication RPT will appear on the LCD panel and play of the selected track will be continuously repeated until the Repeat mode is cancelled by pressing the Repeat button again or by activating the Scan 9 or Shuffle 7 functions.
When the Repeat button is pressed and held longer than 2 seconds, the RPT and DISC indications will appear on the LCD panel and play of the selected disc will be continually repeated until the Disc Repeat mode is cancelled by pressing the Repeat button again or by activating the Scan 9 or Shuffle 7 functions.
9TRACK / DISC SCAN (SCN)
When the Scan button is pressed, the indication "SCN" will appear on the LCD panel and the first 10 seconds of each track on the disc will be played in order. When a desired track is reached, press the Scan button again and play of that track will continue (SCN will disappear from the display). Scan mode will be cancelled by activating any other function (Repeat, Shuffle, Disc Select, Track Select, or Track Search). When the Scan button is pressed and held for longer than 2 seconds, the SCN and DISC indications will appear on the LCD panel and the first 10 seconds of the first track of each disc in the magazine will be played. When a desired disc is reached, press the Scan button again and play of that disc will continue (SCAN and DISC will disappear from the display). Disc Scan mode will also be cancelled by activating any other function (Repeat, Shuffle, Disc Select, Track Select, or Track Search).
bl RESET BUTTON
A reset button is located on the front panel of the remote control which must be activated with a pen or other thin object as it is recessed to prevent accidental engagement. The reset circuitry is provided to protect the unit's microprocessor and laser
1.Initial installation after all wiring is completed (this must be done).
2.If abnormal disc operation is encountered, the reset button may be pressed to clear the system and return to normal operation.
IMPORTANT: Use of the Reset button on the CD Changer will cause the CD magazine to be automatically ejected. Make certain changer door is fully opened prior to using Reset.