“Connect” is a manual connection button. By clicking it, the system can be connected to the Internet again.
Click “Save” to save the current configuration. Restart all PCs connected to the router.
NOTE: Save the router configuration after completion; otherwise, the configuration will be lost after the router is restarted.
Other configuration options of the PPPoE WAN setup screen:
MTU: Input the MTU value of the data package (the default value is 1454). Do not change it unless you are experiencing connection problems. Your ISP can give you the correct value in case the default value does not work.
Disconnect PPP session if idle time is longer than _ Min: If you choose this option and set up the time “T,” then the router automatically disconnects from the Internet after “T” minutes of idle time.
Connect On Demand: The router can automatically connect with the Internet if
there is Internet access after disconnection. Note: During usage, if there is disconnection due to external causes, then the router will try to connect with the Internet at once until a successful
22