Intellinet Network Solutions 523431 manual Link Information, Routing Table for advanced users only

Page 36

the connection speed. Auto is the default and recommended mode. Speed: When in Manual mode, you can define the port speed here: either 10 Mbps or 100 Mbps.

Apply: Apply current settings.

Link Information:

Port: The router’s WAN and LAN ports.

Link: Port is in use (on) or not connected (off).

Speed: Current port speed: 10 or 100 Mbps.

Duplex: Full or half duplex.

Link Statistics: Detailed traffic statistic for each port.

NOTE: Save the router configuration after completion; otherwise, the configuration will be lost after the router is restarted.

4.6.5 Routing Table (for advanced users only)

Click “Basic setup” —> ”Routing Table” to set up static routes:

Type: Routing Type NET or Host.

Target: Enter the IP address of the specified network or host you want to access using the static route.

Mask: Enter the subnet mask to be used for the specified network; e.g., 255.255.255.0 => 24.

Gateway: Enter in the gateway IP address for the specified network.

To save the new routing rule, click on the “Add” button. To delete a routing rule, check the selection box behind the entry and click on the “Del” button.

36

Image 36
Contents INT-523431-UM-1106-01 Table of Contents Specifications IntroductionSwitch ports, auto sense cross cable Wireless Frequency 412 -2.472 GHzOne 10/100 Mbps RJ-45 port, automatic External Sense cross cable PortsData ModulationControl Based on Web application Interface Upnp Gateway Virtual server QoS & VPN serverBefore Installation Installation2MB Flash MemoryPower LED Long light LED flashes on-off-on-off during normal Description ExplanationLAN Connect personal computers, hubs or switches Antenna Power Port LAN 1 ~ ResetWindows 2000 Setup Connect xDSL/cable modem or LAN cablePage Page Page Page Windows XP Setup Page Page Page Router Setup Start Internet Explorer to LogPPPoE Configuration Page Page Other configuration options of the PPPoE WAN setup screen Page Page Other configuration options Static IP ConfigurationPage Status WAN Status Click Status WAN StatusWireless Status Click Status Wireless StatusLAN Status Click Status -LAN StatusBasic Setup 4.6.1 WAN Setup Wireless Setup Region Configure the region depending on your location Reject mode Specified client can not connectLAN Setup Click Basic Setup LAN/DHCP SetupSystem IP Setup Click Basic setup Link Setup/Info Link Setup Link Information Routing Table for advanced users onlySystem Administrator Setup Firmware Upgrade Upgrade procedurePage System Log Click System System logMiscellaneous Configurations Config Mgmt/RestartPage QoS Basic Setup IP QoSClick QoS IP QoS Application QoS Click QoS Application QoSPorts QoS Click QoS Port QoSNAT Applications Click NAT ApplicationsSetup Method Application Port Internal Server Click NAT Internal ServerProtocol Server Port Forwarding Rule Name Shiii TCP Protocol TCPPort Trigger NAT On/Off Advanced Setup Firewall Ddns Click Advanced Ddns as followsWOL Wake-on LAN Click Advanced WOLURL Filter Click Advanced URL FilterRemote Management VPN Setup Click Advanced VPN SetupExample http//123.456.7898081 remote management port set to SchedulerSetup Method Appendix a UTP Cable Specifications Straight-through Cable Crossover CablePage
Related manuals
Manual 4 pages 43.38 Kb