Intellinet Network Solutions 523431 manual Click Advanced URL Filter

Page 57

called the Magic Packet. The router sends such a Magic Packet to a specific computer.

Setup Method:

1.Enter the computer’s name and the LAN card’s MAC address. Then click “Add” to add new rule. You can search for the MAC addresses of all connected computers using the “Search MAC address” button.

2.Clicking on the “Wake-up PC” button sends the Magic Packet to the computer, which causes the computer to start up.

3.If you want to delete a rule, select the rule and click “Del.”

NOTE: This function only works with WOL-enabled computers.

4.10.4 URL Filter

Click “Advanced ” —> ”URL Filter.”

Control the content your LAN users access on the Internet through keywords that can be applied to all users, single IP addresses or single MAC addresses. If you want the filter to apply to all local IP addresses, you should enter the IP address range as defined by the DHCP server (default: 192.168.0.2 – 192.168.0.254).

The input string holds the keywords to be blocked. Multiple keywords are entered with a space (e.g., keyword1 keyword2 keyword3). Alternatively, you can select an

57

Image 57
Contents INT-523431-UM-1106-01 Table of Contents Introduction SpecificationsWireless Frequency 412 -2.472 GHz Switch ports, auto sense cross cableOne 10/100 Mbps RJ-45 port, automatic External Sense cross cable PortsData ModulationControl Based on Web application Interface Gateway Virtual server QoS & VPN server UpnpInstallation Before Installation2MB Flash MemoryDescription Explanation Power LED Long light LED flashes on-off-on-off during normalPower Port LAN 1 ~ Reset LAN Connect personal computers, hubs or switches AntennaWindows 2000 Setup Connect xDSL/cable modem or LAN cablePage Page Page Page Windows XP Setup Page Page Page Start Internet Explorer to Log Router SetupPPPoE Configuration Page Page Other configuration options of the PPPoE WAN setup screen Page Page Static IP Configuration Other configuration optionsPage Click Status WAN Status Status WAN StatusClick Status Wireless Status Wireless StatusClick Status -LAN Status LAN StatusBasic Setup 4.6.1 WAN Setup Wireless Setup Reject mode Specified client can not connect Region Configure the region depending on your locationLAN Setup Click Basic Setup LAN/DHCP SetupSystem IP Setup Click Basic setup Link Setup/Info Link Setup Routing Table for advanced users only Link InformationSystem Administrator Setup Upgrade procedure Firmware UpgradePage Click System System log System LogConfig Mgmt/Restart Miscellaneous ConfigurationsPage QoS Basic Setup IP QoSClick QoS IP QoS Click QoS Application QoS Application QoSClick QoS Port QoS Ports QoSClick NAT Applications NAT ApplicationsSetup Method Application Port Click NAT Internal Server Internal ServerProtocol Server Rule Name Shiii TCP Protocol TCP Port ForwardingPort Trigger NAT On/Off Advanced Setup Firewall Click Advanced Ddns as follows DdnsClick Advanced WOL WOL Wake-on LANClick Advanced URL Filter URL FilterRemote Management Click Advanced VPN Setup VPN SetupExample http//123.456.7898081 remote management port set to SchedulerSetup Method Straight-through Cable Crossover Cable Appendix a UTP Cable SpecificationsPage
Related manuals
Manual 4 pages 43.38 Kb