Intellinet Network Solutions 523431 manual Miscellaneous Configurations, Config Mgmt/Restart

Page 41

(the E-Mail Setup in the Admin Configuration must be completed for this to work) and view the real-time system log of the router.

4.7.4 Miscellaneous Configurations

Click “System” —>“Misc.”

Hostname Setup: Configure the router’s device name used in the network.

Config Mgmt/Restart:

Config Backup: Back up the configuration data.

Config Restore: Restore previously saved the configuration data.

Restore Default: Restore the factory default configuration.

Restart System: Reboot the router.

System Time Setup: For the Scheduler. Configure an accurate time system. Refresh the router’s current time in the proper time zone, or choose another system server until the time to be refreshed.

41

Image 41
Contents INT-523431-UM-1106-01 Table of Contents Introduction SpecificationsWireless Frequency 412 -2.472 GHz Switch ports, auto sense cross cableOne 10/100 Mbps RJ-45 port, automatic External Sense cross cable PortsControl Based on Web application Interface DataModulation Gateway Virtual server QoS & VPN server UpnpInstallation Before Installation2MB Flash MemoryDescription Explanation Power LED Long light LED flashes on-off-on-off during normalPower Port LAN 1 ~ Reset LAN Connect personal computers, hubs or switches AntennaWindows 2000 Setup Connect xDSL/cable modem or LAN cablePage Page Page Page Windows XP Setup Page Page Page Start Internet Explorer to Log Router SetupPPPoE Configuration Page Page Other configuration options of the PPPoE WAN setup screen Page Page Static IP Configuration Other configuration optionsPage Click Status WAN Status Status WAN StatusClick Status Wireless Status Wireless StatusClick Status -LAN Status LAN StatusBasic Setup 4.6.1 WAN Setup Wireless Setup Reject mode Specified client can not connect Region Configure the region depending on your locationLAN Setup Click Basic Setup LAN/DHCP SetupSystem IP Setup Click Basic setup Link Setup/Info Link Setup Routing Table for advanced users only Link InformationSystem Administrator Setup Upgrade procedure Firmware UpgradePage Click System System log System LogConfig Mgmt/Restart Miscellaneous ConfigurationsPage Click QoS IP QoS QoS Basic SetupIP QoS Click QoS Application QoS Application QoSClick QoS Port QoS Ports QoSClick NAT Applications NAT ApplicationsSetup Method Application Port Click NAT Internal Server Internal ServerProtocol Server Rule Name Shiii TCP Protocol TCP Port ForwardingPort Trigger NAT On/Off Advanced Setup Firewall Click Advanced Ddns as follows DdnsClick Advanced WOL WOL Wake-on LANClick Advanced URL Filter URL FilterRemote Management Click Advanced VPN Setup VPN SetupExample http//123.456.7898081 remote management port set to SchedulerSetup Method Straight-through Cable Crossover Cable Appendix a UTP Cable SpecificationsPage
Related manuals
Manual 4 pages 43.38 Kb