Intellinet Network Solutions 523431 manual Click NAT Internal Server

Page 49

4.9.2 Internal Server

Click “NAT” —> “Internal Server.”

The NAT firewall protects the computers in the local network from unauthorized access from the Internet. Sometimes, however, it is required to allow access to a local computer; e.g., a local FTP server. The router’s Internal Server function is designed to let you do that. Each internal server operates on one service port. All service requests to this port will be forwarded to the IP address specified.

Function: After setup, the router can allow some services, such as DNS, SMTP, POP3, HTTP, NEWS, FTP, Telnet, PPTP in LAN, to be accessed from the Internet. Or, by setting up a DMZ server you can have the router redirect all incoming requests to one local computer, bypassing the NAT firewall completely.

49

Image 49
Contents INT-523431-UM-1106-01 Table of Contents Introduction SpecificationsWireless Frequency 412 -2.472 GHz Switch ports, auto sense cross cableOne 10/100 Mbps RJ-45 port, automatic External Sense cross cable PortsModulation DataControl Based on Web application Interface Gateway Virtual server QoS & VPN server UpnpInstallation Before Installation2MB Flash MemoryDescription Explanation Power LED Long light LED flashes on-off-on-off during normalPower Port LAN 1 ~ Reset LAN Connect personal computers, hubs or switches AntennaWindows 2000 Setup Connect xDSL/cable modem or LAN cablePage Page Page Page Windows XP Setup Page Page Page Start Internet Explorer to Log Router SetupPPPoE Configuration Page Page Other configuration options of the PPPoE WAN setup screen Page Page Static IP Configuration Other configuration optionsPage Click Status WAN Status Status WAN StatusClick Status Wireless Status Wireless StatusClick Status -LAN Status LAN StatusBasic Setup 4.6.1 WAN Setup Wireless Setup Reject mode Specified client can not connect Region Configure the region depending on your locationLAN Setup Click Basic Setup LAN/DHCP SetupSystem IP Setup Click Basic setup Link Setup/Info Link Setup Routing Table for advanced users only Link InformationSystem Administrator Setup Upgrade procedure Firmware UpgradePage Click System System log System LogConfig Mgmt/Restart Miscellaneous ConfigurationsPage IP QoS QoS Basic SetupClick QoS IP QoS Click QoS Application QoS Application QoSClick QoS Port QoS Ports QoSClick NAT Applications NAT ApplicationsSetup Method Application Port Click NAT Internal Server Internal ServerProtocol Server Rule Name Shiii TCP Protocol TCP Port ForwardingPort Trigger NAT On/Off Advanced Setup Firewall Click Advanced Ddns as follows DdnsClick Advanced WOL WOL Wake-on LANClick Advanced URL Filter URL FilterRemote Management Click Advanced VPN Setup VPN SetupExample http//123.456.7898081 remote management port set to SchedulerSetup Method Straight-through Cable Crossover Cable Appendix a UTP Cable SpecificationsPage
Related manuals
Manual 4 pages 43.38 Kb