If “Conn. Status” is unchanged, check whether your service type is correct.
7.Confirm the WAN connection status: If the WAN connection is successfully established, then by clicking “Show Internet Information” you can enter the WAN status Web page; or click “Status”
• Connection Type should be PPPoE (ADSL)
• Connection Status should be “successfully connected”
• Physical Address shows the router’s WAN port MAC address.
• WAN IP Address, Subnet Mask, Default Gateway, Primary DNS Server and Secondary DNS Server can be different from the following values. (These addresses are provided by your ISP.)
Click “Disconnect” to disconnect from the Internet.
21