GarrettCom DX40 manual Overview, Configuration, Connectivity

Chapter 1

Overview

1.1Overview

The Magnum DX40 provides connectivity to asynchronous and Ethernet traffic through two programmable serial ports and two Ethernet ports for Fiber optic and (optionally) copper line connections.

1.2Configuration

The following sections describe the features and requirements of the DX40.

1.2.1 Connectivity

Depending on the DX40 Model ordered, the DX40 is equipped with:

• 2 Ethernet ports,

either 2 100FX multi/single mode SFP

or One 100FX multi/single mode SFP and one 10/100 BaseT, RJ45

• 2 serial programmable RS232/485 ports

These ports are all located on the bottom of the device, along with the MAC address, as illustrated in Figure 1-1.

This DX40 is configured with one	Serial ports
100FX multi/single mode port and	MAC Address
one 10/100 BaseT RJ45 port.

Figure 1-1. Bottom View

DX40 Serial Device Router Installation Guide

1