GarrettCom DX40 manual Specifications, Physical, Environmental, Optical

CHAPTER 1 - Overview

Specifications

1.3Specifications

The following sections provide detailed information about the physical, electronic, and industrial specifications of the DX40.

1.3.1 Physical

The physical dimensions and weight of the DX40 are defined in Table 1-1.

	Table 1-1. Physical Specifications
Height:	• Chassis only – 5.125 inches (13cm)
	• Chassis + top and bottom connectors – 6.125 inches (16.56cm)
Width:	5.125 inches (13cm)
Depth:	2.125 inches (5.4cm)
Weight:	3.5 lbs (1.5 kg)

1.3.2 Environmental

The environmental specifications of the DX40 are defined in Table 1-2.

Table 1-2. Environmental Specifications

Operating Temperature: -40C to 85C (-40F to 185F)

No fans

Storage Temperature:	-40C to 85C (-40F to 185F)
Operating Humidity:	95% non-condensing

1.3.3 Optical

The fiber optical specifications of the DX40 are defined in Table 1-3

Table 1-3. Fiber Optic Specifications

Port Type	Conn.	Mode	Tx Power (dBm)		Rx Sensitivity (dBm)		Typical
	Type		Min.	Max.	Min.	Max.	Max, Dist.
100FXPluggableSFP	LC	MM, 1310nM	-19	-14	-32.5	-14	2 km
100FXPluggableSFP	LC	SM, 1310nM	-15	-8	-24	-7	15 km
100FXPluggableSFP	LC	SM, 1310nM	-5	0	-34	-7	40 km

“Typical maximum distance” is an estimated projection based on typical fiber installations; actual distance will depend on actual network attenuation. For all MM (multimode) optics, the recommended fiber cable type is 62.5 / 125 µm fiber. For all SM (single mode) optics, the recommended fiber cable type is 9 µm SM fiber.

DX40 Serial Device Router Installation Guide

4