CHAPTER 2 - Installation
Installation of the DX40 Unit
~ or |
|
Serial No: 0650 0034
Grounding screw
Figure 2-5. Ground and Power Connections
ELECTRICAL WARNING: Verify that a proper ground connection is made from the grounding screw to facility ground prior to connecting power to the DX40. Failure to have a proper ground path could cause serious injury or death to personnel in cases of power surges.
Making the Ground Connection
The ground wire should be 14 AWG terminated with a #6 ring lug.
Make the facility ground connection as follows:
1.Loosen the ground screw on the chassis, insert the #6 ring lug, and tighten the ground screw.
2.Connect the other end of the ground wire to the facility ground.
DX40 Serial Device Router Installation Guide
16