QUICK START GUIDE
QS.1.2 Supported Network Topologies
With either media supported topologies include: star, mesh and ring. The port that connects one switch to another is often called the uplink port and with many switches the uplink port can operate at much higher baud rates than the standard ports. The link formed by the connection of of several switches higher speed uplink ports is often referred to as a backbone.
Star | Mesh | Ring |
Star Architecture
•Single Point of failure before loss of communications
•Additional Ethernet switches Required
•Network Recovery in approximately 6 ms per Ethernet switch
Mesh Architecture
•Multiple Points of failure required before loss of communications
•Additional Fiber Cables required
Ring Architecture
•Full Network Redundancy
•Allows for Fastest Network Recovery *
•Most Cost Effective Solution
*RO mode has typical recovery time of ≤ 5 ms/hop.
MULTILINK ML1600/2400 ETHERNET COMMUNICATIONS SWITCH – QUICKSTART GUIDE |