GE user manual Introduction, PB3-POS-RP Overview

7

Introduction

This manual provides all the information necessary to properly install this product.

**CAUTION:

Your system’s layout, camera assignment, PB3 termination, and serial device model should all be selected before starting the installation.

PB3-POS-RP Overview

The GE PB3-POS-RP (PB3) is a specific model of ProBridge that interfaces the DVMRe family of digital video multiplexer/recorders to retail point-of-sale (POS) devices often identified as electronic cash registers (ECRs) and some ATM’s.

One PB3 is required per device. Where multiple devices are connected to a single DVMRe unit, the individual PB3’s are interconnected through its built-in RS485 network.

A list of the supported serial devices associated with the devices can be found in the DIP switch settings section on page 24.