GE PB3-POS-RP user manual Hyperterminal Setup, Equipment Required

Page 28

28

PB3-POS-RP ProBridge

User Manual

Hyperterminal Setup

Manual configuration can also be completed using Windows HyperTerminal in stead of the DIP switches. Manual configuration should only be used if the “POS Device Selection” does not conform to your specific device because baud rates or protocols are slightly different than the default values for the selected device.

Equipment Required

You will need the following equipment to program the PB3 using HyperTerminal:

•A PC or Laptop Computer with a COM port and Windows 98/NT/200/XP installed and operational.

•The supplied 4310-0047B PB3 to PC (DB9F to RJ45) cable.

Setup

1.Remove power and disconnect the PB3 from the DVMRe.

2.Plug the 4310-0047B cable into Port 1 of the PB3 and a free COM port on your PC, typically COM1.

3.Launch HyperTerminal, found in Start/Programs/Accessories/Communications/ HyperTerminal.

Image 28

Contents PB3-POS-RP ProBridge Page Efore Y OU B Egin Ntroduction DIP Switch Settings Before You Begin Customer SupportGE Security Conventions Used in this ManualPB3-POS-RP ProBridge Introduction PB3-POS-RP OverviewCompatibility Additional EquipmentDisclaimer DVMRe Type Software VersionPB3-POS-RP Box Contents PB3 System ComponentsInstallation Environment PB3-POS-RP ProBridge includesPower 4310-0008 220VAC Power Supply Power Supply Input Installation PB3 ComponentsTypical System Layout Monitor DVMRe TriplexRequired Dip Switch Information Default Factory Dipswitch SettingsDetailed Installation Steps Verify Operation PB3-POS-RP ProBridge Dip Switch Settings SW1 SettingsSW1 -Switches Display ModeReset Clear Memory Demo Mode Simulated MessageAuto Line Feed SW1 Switches SW2 Switch SW2 SettingsSW2 Switches Protocol SW3 Switches SW3 SettingsIncluded Interfaces SW3 SW4 Settings SW4 Switches 1,2SW4 Switch SW4 SwitchesProblem Probable Cause TroubleshootingSolution Setup Hyperterminal SetupEquipment Required Laptop connected to PB3 running HyperTerminal PB3-POS-RP ProBridge Enter Main Menu Option 2 Port #2 Menu Selection 5 Mode Menu Selection 2 Protocol OptionsMenu Selection 3 Baud Rate Menu Selection 4 ParityMenu Selection 6 Code Character Menus Selection 7 Device TypeMain Menu Option 3 Text Setup Compare Use this command to enable or disable Text filteringText String Bypass CountAppend Line Feed Example of setting Text Setup Menu options Receipt Main Menu Option 4 Alarm Setup Main Menu Option 4 BackupPB3 Specifications Cable Specifications ProBridge to Triplex DVMRe-CTProBridge to DVMRe DVMRe-CD/S DB9FRJ-45 Connector ProBridge to ProBridge CableProBridge to Printer Interconnect Cable ProBridge Interconnect Cable to serial device Part Number 4310-0068A Communication Type RS232Triport Cable Hardware Handshake Jumpers JP1 and JP2Triport Cable Modifications Contacting technical support Online publication library