RS-232 SERIAL CONTROL COMMANDS
F Command
The F command returns the state of pin 14 of the DVI inputs.
Syntax:
f
Parameters:
None
Notes:
“High” is returned if +5V is enabled on the DVI input. “Low” is returned if +5V is disabled on the DVI input.
Using parameters with the F Command
Permits disabling / enabling of +5V for Fiber Optic Extenders.
Syntax:
f param1 param2
Parameters: |
|
|
param1 | DVI input | [1 - 16] |
param2 | State | [0 - 1] |
|
|
|
| Value | Meaning |
| 0 | Disable |
| 1 | Enable |
|
|
|
Notes:
Setting param1 to a value of 0 will apply the value of param2 to all inputs.
17