IP CONTROL - MANAGE EDID
COPY EDID 
Pressing the “COPY EDID” button will display additional options. The following page will open.
On this page, the user can select an EDID from either the LOCAL memory locations (Input) or from a display that is currently attached to any output, and copy that EDID to any other LOCAL memory location. This will allow the user to manage what EDID information will be passed to each source connected to the 16x16 DVI Matrix.
To copy an EDID follow the steps below.
1.Select an EDID from the section ”Select Source to Copy from”. The user can choose an EDID from a display connected to one of the outputs or from an EDID already loaded into one of the LOCAL memory locations (Input).
NOTE: Please note that only one EDID can be selected for copying.
2.Select the LOCAL memory locations that will receive the selected EDID in the section “Select Input(s) to Copy to”.
NOTE: Multiple LOCAL memory locations can be specified during this step.
3.Click on the “Set EDID” button to initiate the change(s).
NOTE: After this command is complete the user will be returned to the Main Page.
This page will automatically refresh every minute, however, at anytime the “Refresh” button can be pressed to refresh the status of the matrix.
32