Gefen EXT-DVI-16416 manual IP Control IP Configuration

Page 37

IP CONTROL - IP CONFIGURATION

IP CONFIGURATION

The IP Configuration page is used to set the IP settings that will be used to access the unit using IP Control. The following items can be configured from this menu.

IP Address (Default: 192.168.0.70)

Subnet (Default: 255.255.255.0)

Gateway (192.168.0.1)

Port (Default: 80)

To change these settings follow the steps below.

1.Enter the desired network information into the fields provided.

2.Press the “Save” button to initiate the change(s).

NOTE: After this command is complete the user will be returned to the Main Page. Setting made on this page will not take effect until the unit is restarted. Please disconnect power from the unit and reconnect power for changes to take effect.

At any time, the “Reset” button can be pressed to return the IP settings to their defaults.

34

Image 37
Contents Page Technical Support Asking for AssistanceTechnical Support Hours Write ToContents Gefen IntroductionGefen 16x16 DVI Matrix How It WorksOperation Notes Package Includes FeaturesPanel Layout Main LCD Display Panel DescriptionsHow to Connect the 16x16 DVI Matrix Connecting and Operating the 16X16 DVI MatrixHow to Operate the 16x16 DVI Matrix Main Display Front Panel DisplayRouting RMT-16416IR RMT-16416IR Remote DescriptionRouting Sources to Displays Empty Battery Slot IR Code Dip Switches RMT-16416IR Remote InstallationHow to Resolve IR Code Conflicts RMT-16416IR Remote ConfigurationInvoking Standby Mode Standby Mode FeatureExiting Standby Mode EDID. What is it and what is it used for? Edid Management FeatureRS-232 Serial Control Interface How do I use these features?RS-232 Features RS-232 Serial Control CommandsCommand Description CommandParameters Param1 Input Param1F command returns the state of pin 14 of the DVI inputs #EDIDDSTOLO param1 param2 param3...param9 #EDIDDSTOLO Function#EDIDDSTOLO 2 1 2 3 4 5 6 7 8 9 10 11 not permitted #EDIDBATOLO Function #EDIDDSTOBA Function#EDIDDETOLO param1 param2 param3...param9 #EDIDDETOLO Function#LOEDIDTOLO Function #LOEDIDTOLO param1 param2 param3#PRLOEDID Function #PRDSEDID Function#PRBAEDID Function #LOCKEDID Function #PREDIDST Function#LOCKEDID param1 #SIPADD param1 param2 param3 param4 #SIPADD Function#SNETMASK param1 param2 param3 param4 #SNETMASK Function#SGATEWAY Function #SGATEWAY param1 param2 param3 param4#PRWEBADD Function #SPORT param1#RSTIP Function #RMTIRADD Function #FADEFAULT Function#RMTIRADD param1 #MASKOUT param1 param2 #MASKOUT Function#ACTIVEBOLO Function #LOCKPOWER param1 #LOCKPOWER Function#STBYMODE Function #STBYMODE param1Main IP Control MainManage Edid IP Control Manage EdidSET Input to Default Edid Copy Edid Masking IP Control MaskingIP Configuration IP Control IP ConfigurationPower Management IP Control BACKUP/RESTORE & Power ManagementSwitching Switching and Masking without the Web InterfaceIP Control Management Without the WEB Interface Single OutputHttp//192.168.0.70/cgibin.shtml?a=s&o=0&i=0 Switching TableHttp//192.168.0.70/cgibin.shtml?a=s&o=a&i=2 Http//192.168.0.70/cgibin.shtml?a=s&o=0&o=1&o=2&o=3&i=0Masking Table MaskingHttp//192.168.0.70/cgibin.shtml?a=m&o0=1 Masking CommandHttp//192.168.0.70/cgibin.shtml?a=m&o5=0&oA=1&o3=1&oF=0 ========================================================= Firmware Update16x16 Waiting for the file to be sent ... press ‘a’ to abortSystem Failure Fan FailurePower Failure Critical Malfunctions Temperature FailureSpecifications Product Registration WarrantyLicensing