RS-232 SERIAL CONTROL INTERFACE
What features are available via the
The GefenPRO 16x16 DVI Matrix can accept commands through the
•Switching/routing of inputs to outputs without the IR remote control.
•Managing the EDID bank and EDID that is loaded into the LOCAL EDID.
•Upload new EDID’s to the EDID bank or directly to the LOCAL EDID location.
•Manage IP settings.
How do I use these features?
These features were initially intended for utilization by custom installers in automated setups. However, these features can be tested and used by using any Windows PC with a terminal program.
What pins are used for communication with the GefenPRO 16x16 DVI Matrix?
Only pins 2 (Receive), 3 (Transmit), and 5 (Ground) are used for communication. A
5 4 3 2 1 | 1 2 3 4 5 |
|
|
|
|
|
|
|
|
|
|
9 8 7 6 | 6 7 8 9 | ||||||||
Only Pins 2 (RX), 3 (TX), and 5 (Ground) are used on the | |||||||||
|
|
|
|
| |||||
Bits per second | 19200 | ||||||||
Data bits | 8 | ||||||||
Parity |
|
|
| None | |||||
Stop bits | 1 | ||||||||
Flow Control |
|
|
| None | |||||
14