Gefen EXT-DVI-16416 manual #EDIDDSTOBA Function, #EDIDBATOLO Function

RS-232 SERIAL CONTROL COMMANDS

#EDIDDSTOBA Function

The #EDIDDSTOBA function reads the downstream EDID and stores it to a specified EDID bank.

Syntax:

#EDIDDSTOBA param1 param2

Parameters:
param1	A downstream display	[1 - 16]
param2	EDID bank offset	[1 - 5]

#EDIDBATOLO Function

The #EDIDBATOLO function reads an EDID from an EDID bank and stores it to any local input.

Syntax:

#EDIDBATOLO param1 param2 param3...param9

Parameters:
param1	EDID bank offset	[1 - 5]
param2	Input list	[0 - 16]
param3 - 9 (optional)	Input list	[1 - 16]

Notes:

By specifying zero as the second parameter, the EDID in the specified bank is copied to all sixteen inputs. If more than eight inputs need to be specified in order to receive the EDID in the specified bank, the #EDIDBATOLO function must be executed twice.

Example:

#EDIDBATOLO 5 2 3 4 5 6 7 8 9 10 11 12 not permitted!

Function must be run twice:

#EDIDBATOLO	5	2 3 4	5 6 7 8 9	max 8 inputs
#EDIDBATOLO	5	10 11	12	remaining inputs

19