Gefen EXT-DVI-16416 manual RMT-16416IR Remote Description, Routing Sources to Displays

Page 12

RMT-16416IR REMOTE DESCRIPTION

RMT-16416IR

1

2

1LED Button Press Indicator

This LED will activate momentarily upon each button press. This visual indicator is to inform the user that a command has been sent by the IR remote control.

2Display and Source Selection Buttons

These buttons will be used to send display and source selections to the 16x16 DVI Matrix.

Routing Sources to Displays

Issuing a routing command is a two step process. The ﬁrst step will be to select a the display (1-16) which a source will be routed to in the next step. Once the display has been entered, the source can then be selected. Select the source (1-16) which will be routed to the display selected in the previous step. For example, to route the source connected to input 6 to the display connected to output 4 the input steps would be the following:

1Press button 4 (display) on the RMT-16416IR remote control.

2Press button 6 (source) on the RMT-16416IR remote control.

3The source will immediately be routed to the display.

9

Image 12

Contents Page Asking for Assistance Technical SupportTechnical Support Hours Write ToContents Introduction GefenGefen 16x16 DVI Matrix How It WorksOperation Notes Features Package IncludesPanel Layout Panel Descriptions Main LCD DisplayConnecting and Operating the 16X16 DVI Matrix How to Connect the 16x16 DVI MatrixHow to Operate the 16x16 DVI Matrix Front Panel Display Main DisplayRouting RMT-16416IR Remote Description RMT-16416IRRouting Sources to Displays RMT-16416IR Remote Installation Empty Battery Slot IR Code Dip SwitchesRMT-16416IR Remote Configuration How to Resolve IR Code ConﬂictsStandby Mode Feature Invoking Standby ModeExiting Standby Mode Edid Management Feature EDID. What is it and what is it used for?How do I use these features? RS-232 Serial Control InterfaceRS-232 Serial Control Commands RS-232 FeaturesCommand Description CommandParam1 Parameters Param1 InputF command returns the state of pin 14 of the DVI inputs #EDIDDSTOLO Function #EDIDDSTOLO param1 param2 param3...param9#EDIDDSTOLO 2 1 2 3 4 5 6 7 8 9 10 11 not permitted #EDIDDSTOBA Function #EDIDBATOLO Function#EDIDDETOLO Function #EDIDDETOLO param1 param2 param3...param9#LOEDIDTOLO Function #LOEDIDTOLO param1 param2 param3#PRDSEDID Function #PRLOEDID Function#PRBAEDID Function #PREDIDST Function #LOCKEDID Function#LOCKEDID param1 #SIPADD Function #SIPADD param1 param2 param3 param4#SNETMASK Function #SNETMASK param1 param2 param3 param4#SGATEWAY Function #SGATEWAY param1 param2 param3 param4#SPORT param1 #PRWEBADD Function#RSTIP Function #FADEFAULT Function #RMTIRADD Function#RMTIRADD param1 #MASKOUT Function #MASKOUT param1 param2#ACTIVEBOLO Function #LOCKPOWER Function #LOCKPOWER param1#STBYMODE Function #STBYMODE param1IP Control Main MainIP Control Manage Edid Manage EdidSET Input to Default Edid Copy Edid IP Control Masking MaskingIP Control IP Configuration IP ConfigurationIP Control BACKUP/RESTORE & Power Management Power ManagementSwitching and Masking without the Web Interface SwitchingIP Control Management Without the WEB Interface Single OutputSwitching Table Http//192.168.0.70/cgibin.shtml?a=s&o=0&i=0Http//192.168.0.70/cgibin.shtml?a=s&o=a&i=2 Http//192.168.0.70/cgibin.shtml?a=s&o=0&o=1&o=2&o=3&i=0Masking Masking TableMasking Command Http//192.168.0.70/cgibin.shtml?a=m&o0=1Http//192.168.0.70/cgibin.shtml?a=m&o5=0&oA=1&o3=1&oF=0 Firmware Update =========================================================Waiting for the ﬁle to be sent ... press ‘a’ to abort 16x16Fan Failure System FailureCritical Malfunctions Temperature Failure Power FailureSpecifications Warranty Product RegistrationLicensing