Gefen EXT-DP-441 manual Switching sources using RS-232, Switching sources using Telnet

Page 16

OPERATING THE 4X1 DISPLAYPORT SWITCHER

Switching sources using RS-232

Conﬁgure the Switch for use with RS-232 (see page 14 for details).

Example: Switch to input 4 using RS-232

1Use the command r 4 to route the Switcher to Input 4. See page 14 - 15 for important information on RS-232 commands. RS-232 commands are case-sensitive.

2The LED indicator for Input 4 will glow bright blue on the front panel.

1

2

terminal ready...

r 4

Route to Input 4

Switching sources using Telnet

Conﬁgure the Switch for use with Telnet. See page 24 for details.

Example: Switch to Input 2 using the Telnet protocol

1Use the command r 2 to route the Switcher to Input 2.

2The LED indicator for Input 2 will glow bright blue.

1

2

Type Cmd: r 2

Route to Input 2

13

Image 16

Contents Page Asking for Assistance Technical SupportTechnical Support Hours Write ToContents Gefen 4x1 DisplayPort Switcher IntroductionGefen How It WorksOperation Notes Features FeaturesPackage Includes Front Panel Layout Front PanelInput Indicators 1 Front Panel DescriptionsBack Panel Layout Back PanelBack Panel Descriptions DP OutIR Remote Control Unit Layout and DescriptionInstalling the RMT-4IR Battery How to Resolve IR Code Conﬂicts Corresponding DIP Switch Settings for each IR ChannelHow to Connect the 4x1 DisplayPort Switcher Connecting the 4X1 Displayport SwitcherWiring Diagram for the 4x1 DisplayPort Switcher Operating the 4X1 Displayport Switcher Front Panel Buttons and LED IndicatorsSwitching sources using the front panel buttons Switching sources using the IR Remote ControlSwitching sources using RS-232 Switching sources using TelnetSerial Port Settings RS-232 ControlCommand Syntax RS-232 Commands#GETPASS Command #IPCONFIG Command #GETUSERNAME Command#RSTIP Command #SETPASS Command #SETHTTPPORT Command#SETTELNETPORT Command #SETUSERNAME Command #SGATEWAY Command#SIPADD Command #SNETMASK Command#USETELNETPASS Command #ACTIVEBOLO Command#FADEFAULT Function #IRRMTADD Command#LOCKPOWER Command #STBYMODE CommandCommand Description Routing and Extender CommandsCommand Telnet Control Gefen#sipadd New IP set to Specifications Warranty Product RegistrationThis product uses UL listed power supplies