Gefen EXT-DP-441 manual #FADEFAULT Function, #IRRMTADD Command

Page 24

RS-232 COMMANDS

#FADEFAULT Function

The #FADEFAULT function will reset the Switcher to the default routing settings.

Syntax:

#fadefault

Parameters:

None

#IRRMTADD Command

The #IRRMTADD sets the IR channel. The IR channel for the Switcher and the IR Remote Control Unit must be the same.

Syntax:

#irrmtadd param1

Parameters:

 

 

param1

State

[0 - 3]

 

 

 

 

Value

Meaning

 

 

 

 

0

IR channel 0

 

 

 

 

1

IR channel 1

 

 

 

 

2

IR channel 2

 

 

 

 

3

IR channel 3

21

Image 24
Contents Page Asking for Assistance Technical SupportTechnical Support Hours Write ToContents Gefen 4x1 DisplayPort Switcher IntroductionGefen How It WorksOperation Notes Features FeaturesPackage Includes Front Panel Layout Front PanelInput Indicators 1 Front Panel DescriptionsBack Panel Layout Back PanelBack Panel Descriptions DP OutIR Remote Control Unit Layout and DescriptionInstalling the RMT-4IR Battery How to Resolve IR Code Conflicts Corresponding DIP Switch Settings for each IR ChannelConnecting the 4X1 Displayport Switcher How to Connect the 4x1 DisplayPort SwitcherWiring Diagram for the 4x1 DisplayPort Switcher Operating the 4X1 Displayport Switcher Front Panel Buttons and LED IndicatorsSwitching sources using the front panel buttons Switching sources using the IR Remote ControlSwitching sources using RS-232 Switching sources using TelnetSerial Port Settings RS-232 ControlRS-232 Commands Command Syntax#GETPASS Command #GETUSERNAME Command #IPCONFIG Command#RSTIP Command #SETHTTPPORT Command #SETPASS Command#SETTELNETPORT Command #SETUSERNAME Command #SGATEWAY Command#SIPADD Command #SNETMASK Command#USETELNETPASS Command #ACTIVEBOLO Command#FADEFAULT Function #IRRMTADD Command#LOCKPOWER Command #STBYMODE CommandRouting and Extender Commands Command DescriptionCommand Telnet Control Gefen#sipadd New IP set to Specifications Warranty Product RegistrationThis product uses UL listed power supplies