Gefen EXT-DP-441 manual Warranty, Product Registration

Page 30

WARRANTY

Gefen warrants the equipment it manufactures to be free from defects in material and workmanship.

If equipment fails because of such defects and Gefen is notified within two (2) years from the date of shipment, Gefen will, at its option, repair or replace the equipment, provided that the equipment has not been subjected to mechanical, electrical, or other abuse or modifications. Equipment that fails under conditions other than those covered will be repaired at the current price of parts and labor in effect at the time of repair. Such repairs are warranted for ninety (90) days from the day of reshipment to the Buyer.

This warranty is in lieu of all other warranties expressed or implied, including without limitation, any implied warranty or merchantability or fitness for any particular purpose, all of which are expressly disclaimed.

1.Proof of sale may be required in order to claim warranty.

2.Customers outside the US are responsible for shipping charges to and from Gefen.

3.Copper cables are limited to a 30 day warranty and cables must be in their original condition.

The information in this manual has been carefully checked and is believed to be accurate. However, Gefen assumes no responsibility for any inaccuracies that may be contained in this manual. In no event will Gefen be liable for direct, indirect, special, incidental, or consequential damages resulting from any defect or omission in this manual, even if advised of the possibility of such damages. The technical information contained herein regarding the features and specifications is subject to change without notice.

For the latest warranty coverage information, refer to the Warranty and Return Policy under the Support section of the Gefen Web site at www.gefen.com.

PRODUCT REGISTRATION

Please register your product online by visiting the Register Product page

under the Support section of the Gefen Web site.

27

Image 30
Contents Page Technical Support Hours Asking for AssistanceTechnical Support Write ToContents Gefen Gefen 4x1 DisplayPort SwitcherIntroduction How It WorksOperation Notes Features FeaturesPackage Includes Front Panel Layout Front PanelInput Indicators 1 Front Panel DescriptionsBack Panel Layout Back PanelBack Panel Descriptions DP OutIR Remote Control Unit Layout and DescriptionInstalling the RMT-4IR Battery How to Resolve IR Code Conflicts Corresponding DIP Switch Settings for each IR ChannelConnecting the 4X1 Displayport Switcher How to Connect the 4x1 DisplayPort SwitcherWiring Diagram for the 4x1 DisplayPort Switcher Switching sources using the front panel buttons Operating the 4X1 Displayport SwitcherFront Panel Buttons and LED Indicators Switching sources using the IR Remote ControlSwitching sources using RS-232 Switching sources using TelnetSerial Port Settings RS-232 ControlRS-232 Commands Command Syntax#GETPASS Command #GETUSERNAME Command #IPCONFIG Command#RSTIP Command #SETHTTPPORT Command #SETPASS Command#SETTELNETPORT Command #SETUSERNAME Command #SGATEWAY Command#SIPADD Command #SNETMASK Command#USETELNETPASS Command #ACTIVEBOLO Command#FADEFAULT Function #IRRMTADD Command#LOCKPOWER Command #STBYMODE CommandRouting and Extender Commands Command DescriptionCommand Telnet Control Gefen#sipadd New IP set to Specifications Warranty Product RegistrationThis product uses UL listed power supplies