Gefen EXT-DP-441 manual RS-232 Commands, Command Syntax, #GETPASS Command

RS-232 COMMANDS

Command Syntax

All RS-232 commands are case-sensitive and must be entered in lowercase. Each command must be preceded by the ‘#’ character. A carriage return must also be appended to every command.

Example:

#set_http_port 80[CR]

	IP Configuration
Command	Description
#get_pass	Prompts for the Telnet password
#get_user_name	Prompts for the Telnet username
#ipconfig	Displays all TCP/IP settings
#rstip	Sets IP configuration to default settings
#set_http_port	Sets the Web server listening port
#set_pass	Sets the Telnet password
#set_telnet_port	Sets the Telnet listening port
#set_user_name	Sets the Telnet user name
#sgateway	Specifies the new gateway
#sipadd	Specifies a new IP address
#snetmask	Specifies a new net mask
#use_telnet_pass	Toggles Telnet password prompt

#GET_PASS Command

The #GET_PASS command prompts for the Telnet password.

Syntax:

#get_pass

Parameters:

None

15