Gefen EXT-DPKVM-441 Operating the 4X1 Dpkvm Switcher, Front Panel Buttons and LED Indicators

Page 15

OPERATING THE 4X1 DPKVM SWITCHER

Front Panel Buttons and LED Indicators

The front panel of the 4x1 DPKVM Switcher has a set of four (4) LED

indicators, displaying which input (source) is being displayed. Each of these LED indicators corresponds to one of the push-buttons on the front panel.

Switching sources using the front panel buttons

Example: Switch to input 3 using the front panel buttons:

1Press button 3 on the front panel of the 4x1 DPKVM Switcher.

2The LED indicator for input 3 will glow bright blue on the front panel.

1

2

Switching sources using the IR Remote Control

Example: Switch to Input 1 using the IR Remote Control:

1Press button 1 on the IR Remote Control Unit. The Activity Indicator on the IR Remote Control Unit will glow yellow, indicating that a button was pressed.

2The LED indicator for input 1 will glow bright blue.

1

2

12

Image 15

Contents 4x1 Dpkvm Switcher Write To Asking for AssistanceTechnical Support Technical Support HoursContents How It Works Gefen 4x1 Dpkvm SwitcherIntroduction GefenOperation Notes Features FeaturesPackage Includes Front Panel Front Panel LayoutFront Panel Descriptions Input Indicators 1Back Panel Back Panel LayoutEthernet Back Panel DescriptionsLayout and Description IR Remote Control UnitInstalling the Battery Corresponding DIP Switch Settings for each IR Channel Setting the IR ChannelEthernet Switching sources using the IR Remote Control Operating the 4X1 Dpkvm SwitcherFront Panel Buttons and LED Indicators Switching sources using the front panel buttonsSwitching sources using Telnet Switching sources using RS-232RS-232 Control Serial Port SettingsRS-232 Commands Command Syntax#GETPASS Command #GETUSERNAME Command #IPCONFIG Command#RSTIP Command #SETHTTPPORT Command #SETPASS Command#SETTELNETPORT Command #SGATEWAY Command #SETUSERNAME Command#SNETMASK Command #SIPADD Command#ACTIVEBOLO Command #USETELNETPASS Command#IRRMTADD Command #FADEFAULT Function#STBYMODE Command #LOCKPOWER CommandRouting Commands Command DescriptionCommand Gefen Telnet Control#sipadd New IP set to Firmware Update Procedure Firmware UpdateInstalling the Rack Ears Rack EAR InstallationSpecifications Product Registration WarrantyRev A2 Nordhoff St., Chatsworth CA