Gefen EXT-DPKVM-441 user manual Back Panel Descriptions, Ethernet

Page 10

BACK PANEL DESCRIPTIONS

15V DC

Connect the included 5V DC locking power supply to this receptacle.

2DP In 1 - In 4

Each of these ports will accept a standard DisplayPort source device.

3Ext IR

Connect an IR extender cable to this port.

4USB Out (1 - 2)

Connect USB devices (e.g. mouse devices, keyboards, etc.) to these ports.

5Ethernet

Use an Ethernet cable to connect the Switcher to a network in order to communicate via Telnet.

6RS-232 Serial Port

This port is used for serial communication using an RS-232 control device. For details, refer to page 14.

7USB In (1 - 4)

Connect USB source devices to these ports.

8DP Out

This port will accept a single standard DisplayPort output device. The currently selected DisplayPort input source will be output via this port.

9Audio Out

Connect an audio output device to this connector using a 3.5 mm mini-stereo cable. The audio output will be for the currently selected input source.

10Audio IN

Connect audio source device to this port using the 3.5 mm mini-stereo cable.

7

Image 10

Contents 4x1 Dpkvm Switcher Technical Support Hours Asking for AssistanceTechnical Support Write ToContents Gefen Gefen 4x1 Dpkvm SwitcherIntroduction How It WorksOperation Notes Features FeaturesPackage Includes Front Panel Layout Front PanelInput Indicators 1 Front Panel DescriptionsBack Panel Layout Back PanelBack Panel Descriptions EthernetIR Remote Control Unit Layout and DescriptionInstalling the Battery Setting the IR Channel Corresponding DIP Switch Settings for each IR ChannelEthernet Switching sources using the front panel buttons Operating the 4X1 Dpkvm SwitcherFront Panel Buttons and LED Indicators Switching sources using the IR Remote ControlSwitching sources using RS-232 Switching sources using TelnetSerial Port Settings RS-232 ControlCommand Syntax RS-232 Commands#GETPASS Command #IPCONFIG Command #GETUSERNAME Command#RSTIP Command #SETPASS Command #SETHTTPPORT Command#SETTELNETPORT Command #SETUSERNAME Command #SGATEWAY Command#SIPADD Command #SNETMASK Command#USETELNETPASS Command #ACTIVEBOLO Command#FADEFAULT Function #IRRMTADD Command#LOCKPOWER Command #STBYMODE CommandCommand Description Routing CommandsCommand Telnet Control Gefen#sipadd New IP set to Firmware Update Firmware Update ProcedureRack EAR Installation Installing the Rack EarsSpecifications Warranty Product RegistrationRev A2 Nordhoff St., Chatsworth CA