Gefen EXT-DPKVM-441 user manual #SETUSERNAME Command, #SGATEWAY Command

RS-232 COMMANDS

#SET_USER_NAME Command

The #SET_USER_NAME command sets the Telnet user name.

Syntax:

#set_user_name param1

Parameters:

param1String

Notes:

The maximum length of the username string is 20 characters.

#SGATEWAY Command

Specifies the new IP gateway. Dot-decimal notation must be used when specify- ing the IP address. A reboot is required after the new IP gateway address has been assigned.

Syntax:

#sgateway param1.param2.param3.param4

Parameters:
param1	Gateway address	[0 - 255]
param2	Gateway address	[0 - 255]
param3	Gateway address	[0 - 255]
param4	Gateway address	[0 - 255]

Example:

#sgateway 192.168.1.1

18