Gefen EXT-DPKVM-441 user manual RS-232 Control, Serial Port Settings

Page 17

RS-232 CONTROL

Only pins 2 (Receive), 3 (Transmit), and 5 (Ground) are used for communication. A null-modem adapter should not be used with this product.

5 4 3 2 1

1 2 3 4 5

9 8 7 6

6 7 8 9

Only Pins 2 (RX), 3 (TX), and 5 (Ground) are used on the RS-232 serial interface

 

Serial Port Settings

Bits per second

............................................................................................ 19200

Data bits

8

Parity

None

Stop bits

1

Flow Control

None

IMPORTANT: When sending RS-232 commands, a carriage return and a line feed character must be included at the end of each line.

NOTE: Only pins 2 (Receive), 3 (Transmit), and 5 (Ground) are used for communication. A null-modem adapter should not be used with this product.

14

Image 17
Contents 4x1 Dpkvm Switcher Technical Support Asking for AssistanceTechnical Support Hours Write ToContents Introduction Gefen 4x1 Dpkvm SwitcherGefen How It WorksOperation Notes Package Includes FeaturesFeatures Front Panel Front Panel LayoutFront Panel Descriptions Input Indicators 1Back Panel Back Panel LayoutEthernet Back Panel DescriptionsLayout and Description IR Remote Control UnitInstalling the Battery Corresponding DIP Switch Settings for each IR Channel Setting the IR ChannelEthernet Front Panel Buttons and LED Indicators Operating the 4X1 Dpkvm SwitcherSwitching sources using the front panel buttons Switching sources using the IR Remote ControlSwitching sources using Telnet Switching sources using RS-232RS-232 Control Serial Port Settings#GETPASS Command RS-232 CommandsCommand Syntax #RSTIP Command #GETUSERNAME Command#IPCONFIG Command #SETTELNETPORT Command #SETHTTPPORT Command#SETPASS Command #SGATEWAY Command #SETUSERNAME Command#SNETMASK Command #SIPADD Command#ACTIVEBOLO Command #USETELNETPASS Command#IRRMTADD Command #FADEFAULT Function#STBYMODE Command #LOCKPOWER CommandCommand Routing CommandsCommand Description Gefen Telnet Control#sipadd New IP set to Firmware Update Procedure Firmware UpdateInstalling the Rack Ears Rack EAR InstallationSpecifications Product Registration WarrantyRev A2 Nordhoff St., Chatsworth CA