Gefen EXT-DPKVM-441 user manual #LOCKPOWER Command, #STBYMODE Command

Page 25

RS-232 COMMANDS

#LOCKPOWER Command

The #LOCKPOWER enables/disables the power lock state. Enabling this feature will store the 5V status for each input prior to shutting the unit down. This preserves the 5V state when the unit is restarted.

Syntax:

#lockpower param1

Parameters:

 

 

param1

State

[0 - 1]

 

 

 

 

Value

Meaning

 

0

Disable Power Lock

 

 

 

 

1

Enable Power Lock

 

 

 

#STBYMODE Command

The #STBYMODE command toggles the Standby Mode state. When the Switcher is powered OFF (not unplugged), then the unit is in Standby Mode. Executing this command from Standby Mode will power ON the Switcher.

Syntax:

#stbymode param1

Parameters:

 

 

param1

Mode

[0 - 1]

 

 

 

 

Value

Meaning

 

 

 

 

0

Normal Mode

 

 

 

 

1

Standby Mode

 

 

 

22

Image 25
Contents 4x1 Dpkvm Switcher Technical Support Asking for AssistanceTechnical Support Hours Write ToContents Introduction Gefen 4x1 Dpkvm SwitcherGefen How It WorksOperation Notes Features FeaturesPackage Includes Front Panel Front Panel LayoutFront Panel Descriptions Input Indicators 1Back Panel Back Panel LayoutEthernet Back Panel DescriptionsLayout and Description IR Remote Control UnitInstalling the Battery Corresponding DIP Switch Settings for each IR Channel Setting the IR ChannelEthernet Front Panel Buttons and LED Indicators Operating the 4X1 Dpkvm SwitcherSwitching sources using the front panel buttons Switching sources using the IR Remote ControlSwitching sources using Telnet Switching sources using RS-232RS-232 Control Serial Port SettingsCommand Syntax RS-232 Commands#GETPASS Command #IPCONFIG Command #GETUSERNAME Command#RSTIP Command #SETPASS Command #SETHTTPPORT Command#SETTELNETPORT Command #SGATEWAY Command #SETUSERNAME Command#SNETMASK Command #SIPADD Command#ACTIVEBOLO Command #USETELNETPASS Command#IRRMTADD Command #FADEFAULT Function#STBYMODE Command #LOCKPOWER CommandCommand Description Routing CommandsCommand Gefen Telnet Control#sipadd New IP set to Firmware Update Procedure Firmware UpdateInstalling the Rack Ears Rack EAR InstallationSpecifications Product Registration WarrantyRev A2 Nordhoff St., Chatsworth CA