Gefen EXT-DPKVM-441 user manual #SETHTTPPORT Command, #SETPASS Command, #SETTELNETPORT Command

Page 20

RS-232 COMMANDS

#SET_HTTP_PORT Command

The #SET_HTTP_PORT command sets the Web server listening port.

Syntax:

#set_http_port param1

Parameters:
param1	Port	[0 - 255]

#SET_PASS Command

The #SET_PASS command sets Telnet password.

Syntax:

#set_pass param1

Parameters:

param1String

Notes:

The maximum length of the password string is 20 characters.

#SET_TELNET_PORT Command

The #SET_TELNET_PORT command sets the Telnet server listening port.

Syntax:

#set_telnet_port param1

Parameters:
param1	Port	[0 - 255]

17

Image 20

Contents 4x1 Dpkvm Switcher Asking for Assistance Technical SupportTechnical Support Hours Write ToContents Gefen 4x1 Dpkvm Switcher IntroductionGefen How It WorksOperation Notes Package Includes FeaturesFeatures Front Panel Layout Front PanelInput Indicators 1 Front Panel DescriptionsBack Panel Layout Back PanelBack Panel Descriptions EthernetIR Remote Control Unit Layout and DescriptionInstalling the Battery Setting the IR Channel Corresponding DIP Switch Settings for each IR ChannelEthernet Operating the 4X1 Dpkvm Switcher Front Panel Buttons and LED IndicatorsSwitching sources using the front panel buttons Switching sources using the IR Remote ControlSwitching sources using RS-232 Switching sources using TelnetSerial Port Settings RS-232 Control#GETPASS Command RS-232 CommandsCommand Syntax #RSTIP Command #GETUSERNAME Command#IPCONFIG Command #SETTELNETPORT Command #SETHTTPPORT Command#SETPASS Command #SETUSERNAME Command #SGATEWAY Command#SIPADD Command #SNETMASK Command#USETELNETPASS Command #ACTIVEBOLO Command#FADEFAULT Function #IRRMTADD Command#LOCKPOWER Command #STBYMODE CommandCommand Routing CommandsCommand Description Telnet Control Gefen#sipadd New IP set to Firmware Update Firmware Update ProcedureRack EAR Installation Installing the Rack EarsSpecifications Warranty Product RegistrationRev A2 Nordhoff St., Chatsworth CA