Gefen EXT-DPKVM-441 user manual Rack EAR Installation, Installing the Rack Ears

Page 30

RACK EAR INSTALLATION

Installing the Rack Ears

Rack mount ears are provided for installation of this unit into a 1U rack mount space.

1.Locate the side screws on the unit.

2.Remove the front 2 screws that are located closest to the front of the unit.

3.Using the removed screws, screw the rack mounting bracket into the unit.

4.Repeat the procedure on the opposite side of the unit.

Front of unit

Rear of unit

27

Image 30

Contents 4x1 Dpkvm Switcher Technical Support Hours Asking for AssistanceTechnical Support Write ToContents Gefen Gefen 4x1 Dpkvm SwitcherIntroduction How It WorksOperation Notes Features FeaturesPackage Includes Front Panel Layout Front PanelInput Indicators 1 Front Panel DescriptionsBack Panel Layout Back PanelBack Panel Descriptions EthernetIR Remote Control Unit Layout and DescriptionInstalling the Battery Setting the IR Channel Corresponding DIP Switch Settings for each IR ChannelEthernet Switching sources using the front panel buttons Operating the 4X1 Dpkvm SwitcherFront Panel Buttons and LED Indicators Switching sources using the IR Remote ControlSwitching sources using RS-232 Switching sources using TelnetSerial Port Settings RS-232 ControlRS-232 Commands Command Syntax#GETPASS Command #GETUSERNAME Command #IPCONFIG Command#RSTIP Command #SETHTTPPORT Command #SETPASS Command#SETTELNETPORT Command #SETUSERNAME Command #SGATEWAY Command#SIPADD Command #SNETMASK Command#USETELNETPASS Command #ACTIVEBOLO Command#FADEFAULT Function #IRRMTADD Command#LOCKPOWER Command #STBYMODE CommandRouting Commands Command DescriptionCommand Telnet Control Gefen#sipadd New IP set to Firmware Update Firmware Update ProcedureRack EAR Installation Installing the Rack EarsSpecifications Warranty Product RegistrationRev A2 Nordhoff St., Chatsworth CA