Industrial Ethernet Layer 2 Managed Switch – Web Management Manual
Trunking
This function is used for setting the groups of link aggregation. Port trunking allows user to combine multiple physical ports into a single logical channel. It can increase the link speed and provide the better redundancy availability.
Supported groups depend on the total number of switch ports on the equipment. 508 Series Managed Switch supports up to 4 trunking groups.
NOTE!!
Active trunking function will reset and disable VLAN & Ring Pair settings.
Port Status
User can check link status of each port in this function.
April 29, 2008 | 12 |