ICP DAS USA MSM-508FCS Vlan Mode, Port Based Vlan, 802.1Q Check Mode, 802.1Q Secure Mode

Page 21

Industrial Ethernet Layer 2 Managed Switch – Web Management Manual

7.VLAN

Virtual LANs (VLAN) allows you to setting logical groups of devices, even they are not located on the same physical segment. The logical group called a VLAN, all devices belong to the VLAN has the same network attributes, and it’s isolated from the other network logically. A VLAN provides higher communication security, and makes you to limit traffic flooding easily.

￿VLAN Mode

Port Based VLAN

The frames which arrive at specified ports belong to the same

 

VLAN.

802.1Q Check Mode

Set mode to 802.1Q VLAN. Forward Ingress frames that

 

frames aren’t the VLAN member, but discard ingress frame

 

which VID is unrecognized.

802.1Q Secure Mode

Set mode to 802.1Q VLAN. Discard Ingress frames that frames

 

aren’t the VLAN member and VID is unrecognized.

April 29, 2008

18

Image 21
Contents Industrial Managed Ethernet Switch Contents Authentication Managed Switch Web Management Operation Step Web ConnectionApril 29 Information Basic SettingNetwork IP Address:Gateway: Mask: Serial PortMAC Address: Modbus Net IDDigital Input / Output Redundant Setting Redundant SettingRecovery Time Setting Recovery Time Cyber-Ring Protocol:Hello Time STP Protocol: Maxage Time STP Protocol: Forward Time STP Protocol:Mirror Port configurationEgress Egress & IngressPort Status TrunkingPort Cable CheckingSpeed DuplexRelay Output Relay AlarmAlarm Event setting Email AlarmReceiver Email SettingEmail Record 802.1Q Check Mode Vlan Mode802.1Q Secure Mode Port Based VlanPort based VLANs 802.1Q VLANsEgress Policy 2,1 Weight Fair queuing scheme QoS ModeQoS Strict priority schemeTag Priority Default PriorityIP ToS/DiffServ 802.1p Tag over Tos/DiffServDiagnosis AuthenticationPing AccountAccessible IP Reboot Setting Default SettingNetwork Setting Serial Port Setting