ICP DAS USA MSM-508FCS, MSM-508FT user manual Email Alarm, Alarm Event setting

Page 18

Industrial Ethernet Layer 2 Managed Switch – Web Management Manual

6.Email Alarm

ICPDAS Managed Switch can notify you by email when the specified event occurred. This chapter will guide you how to setting the related parameters.

User can specify system and port events that warning emails will be sent.

Power1 ON	The status of power1 from OFF turns to ON.
Power2 ON	The status of power2 from OFF turns to ON.
Power1 OFF	The status of power1 from ON turns to OFF.
Power2 OFF	The status of power2 from ON turns to OFF.
System Relay ON	System relay activate.
System Relay OFF	System relay
System software Reboot	User reboots the Switch equipment through Switch
	Management tool or the console command.
Link Lose	Port disconnected, such as, no cable connected; cable
	break; opposing device fail.
Communication Lose	Port of the ring pair disconnected

Image 18

Contents Industrial Managed Ethernet Switch Contents Authentication Managed Switch Web Management Operation Web Connection StepApril 29 Basic Setting InformationNetwork IP Address：Gateway： MAC Address： Serial PortMask： Modbus Net IDDigital Input / Output Redundant Setting Redundant SettingRecovery Time Setting Recovery Time Cyber-Ring Protocol：Hello Time STP Protocol： Forward Time STP Protocol： Maxage Time STP Protocol：Egress Port configurationMirror Egress & IngressTrunking Port StatusSpeed Cable CheckingPort DuplexRelay Alarm Relay OutputEmail Alarm Alarm Event settingEmail Setting ReceiverEmail Record 802.1Q Secure Mode Vlan Mode802.1Q Check Mode Port Based VlanPort based VLANs 802.1Q VLANsEgress Policy QoS QoS Mode2,1 Weight Fair queuing scheme Strict priority schemeIP ToS/DiffServ Default PriorityTag Priority 802.1p Tag over Tos/DiffServPing AuthenticationDiagnosis AccountAccessible IP Network Setting Default SettingReboot Setting Serial Port Setting