ICP DAS USA MSM-508FT, MSM-508FCS user manual Basic Setting, Information

Page 7

Industrial Ethernet Layer 2 Managed Switch – Web Management Manual

2.Basic Setting

This chapter describes how to setting the commonly information on your Managed Switch.

￿Information

Module Name

Use to specify the Switch Name, and also displayed as the console prompt. Max. 8 characters.

Module Information

Use to memo the extra description of the Switch Module. 16 characters max..

Web Server TCP Port

Specify the connection port of the Web Server. Default setting is 80.

Date Time Setting

This function can specify the Time zone and the current date time information of the Switch. You can click the <Set Now> button to get the current date time from your browser,

and the <Format Checking> button will help you to verify the setting value. Date Time value can be appended to the email messages, alarm records…etc.

April 29, 2008

4

Image 7
Contents Industrial Managed Ethernet Switch Contents Authentication Managed Switch Web Management Operation Step Web ConnectionApril 29 Information Basic SettingIP Address: NetworkGateway: Modbus Net ID Serial PortMask: MAC Address:Digital Input / Output Redundant Setting Redundant SettingRecovery Time Cyber-Ring Protocol: Recovery Time SettingHello Time STP Protocol: Maxage Time STP Protocol: Forward Time STP Protocol:Egress & Ingress Port configurationMirror EgressPort Status TrunkingDuplex Cable CheckingPort SpeedRelay Output Relay AlarmAlarm Event setting Email AlarmReceiver Email SettingEmail Record Port Based Vlan Vlan Mode802.1Q Check Mode 802.1Q Secure Mode802.1Q VLANs Port based VLANsEgress Policy Strict priority scheme QoS Mode2,1 Weight Fair queuing scheme QoS802.1p Tag over Tos/DiffServ Default PriorityTag Priority IP ToS/DiffServAccount AuthenticationDiagnosis PingAccessible IP Serial Port Setting Default SettingReboot Setting Network Setting